JC/T 2555-2019Wood-plastic composite material for 3D printing (English PDF)
用于3D打印的木塑复合材料
This is a limited preview
Buy now to download the full PDF (8 pages)
Need quotation for your management?
Get a formal quotation for JC/T 2555-2019 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
January 1, 2019
Implementation date
July 1, 2020
Scope
JC/T 2555-2019 is the English-translated version of 用于3D打印的木塑复合材料.
JC/T 2555-2019 is the Chinese standard "Wood-plastic composite material for 3D printing". This standard specifies the terms and definitions, requirements, test methods, inspection rules, and marking, packaging, transportation and storage of wood-plastic composite materials for 3D printing.
This standard is applicable to 3D printing using fused deposition modeling technology, using polylactic acid as the base material and wood-plastic composite materials to make printing filaments.
However, it is not applicable to wood-plastic composite materials for medical use and wood-plastic composite materials for dangerous goods packaging. It was issued by Ministry of Industry and Information Technology.
Found what you need?
Document preview — JC/T 2555-2019
National Standard of the People's Republic of China
- ICS
- 91.100.99
- Classification
- Q18
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Classification
- 3.2 Marking
- 4.2 Designation
- 5 Technical requirements
- 5.1 Basic requirementss
- 5.2 Requirements before packing
- 5.3 Principles for subpackage of products
- 5.4 Packing materials and material requirements
- 5.5 Box manufacturing requirements
- 5.6 Packing requirements
- 5.7 Protection requirement
- 6 Test methods
- 8 Inspection Rules
- 9 Marking, Packaging, Transportation and Storage
1 Foreword
JC/T 2555-2019 was issued by Ministry of Industry and Information Technology on 24 December 2019 and has been in force since 1 July 2020.
The JC/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 8 pages in English translation.
2 Scope Preview
This standard specifies the terms and definitions, requirements, test methods, inspection rules, and marking, packaging, transportation and storage of wood-plastic composite materials for 3D printing. This standard is applicable to 3D printing using fused deposition modeling technology, using polylactic acid as the base material and wood-plastic composite materials to make printing filaments. However, it is not applicable to wood-plastic composite materials for medical use and wood-plastic composite materials for dangerous goods packaging.
JC/T 2555-2019 falls under ICS 91.100.99, in the field of construction materials and building.
This catalogue holds 579 other JC/T standards in that field.
In this catalogue, JC/T standards carry edition years from 1973 to 2026.
3 About this standard
Sector: Building Materials Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 8 pages (approximate)
Chinese original: about 8,869 characters
4 Related standards
Standards on related subjects:
GB/T 17748-2016 — Aluminium-plastic composite panels for curtain walls
GB/T 9780-2013 — Test method for dirt pickup resistance and stain remvoal of film of architectural coatings and paint
JG/T 169-2005 — Light weight panels for partition walls used in buildings
JC/T 2111-2025 — Test method for the thermal storage performance of phase change materials for building applications
JC/T 2079-2025 — Elastomeric stucco for building
JC/T 2561-2020 — Non-combustible metal composite board for building decoration
5 Classification and status
International classification (ICS): 91.100.99
Chinese Standard Classification (CCS): Q 18
Prefix JC/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.
How to Download JC/T 2555-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JC/T 1020-2026 — Expanded perlite for thermal isolation of low temperature equipment
JC/T 1021.6-2026 — Methods for chemical analysis of nonmetal mineral and rock. Part 6: Methods for chemical analysis of fluorite
JC/T 2003-2026 — Precast concrete channels for irrigation and drainage
JC/T 2555-2019
$90.00