Valid

JC/T 2538-2019Continuous advancing mandrel winding fiberglass mortar pipes (English PDF)

玻璃纤维增强塑料连续缠绕夹砂管

Preview PDF

This is a limited preview

Buy now to download the full PDF (29 pages)

Need quotation for your management?

Get a formal quotation for JC/T 2538-2019 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

National · Recommended

Issue date

August 2, 2019

Implementation date

January 1, 2020

Scope

JC/T 2538-2019 is the English-translated version of 玻璃纤维增强塑料连续缠绕夹砂管.

JC/T 2538-2019 — This standard specifies the terms and definitions, classification and marking, raw materials, requirements, test methods, inspection rules and markings, packaging, transportation and lifting, and storage of glass fiber reinforced plastic continuous winding sand pipe.

This standard applies to the nominal diameter of 200mm~4000mm, the pressure class is 0.1MPa~3.2MPa, the ring stiffness class is 1250N/m2~10000N/m2 for water supply and drainage, water conservancy, irrigation and irrigation and other pipeline engineering glass fiber reinforced plastic continuous??

Winding sand pipe (hereinafter referred to as CWFP pipe), the maximum temperature of the medium does not exceed 50°C.

Found what you need?

Document preview — JC/T 2538-2019

National Standard of the People's Republic of China

ICS
83.120
Classification
Q 23

Issued by: Ministry of Industry and Information Technology

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 Classification
  • 4.2 Designation
  • 6 Test methods
  • 7 Inspection Rules
  • 9 Marking, Packaging, Transportation and Storage

1 Foreword

JC/T 2538-2019 was issued by Ministry of Industry and Information Technology on 2 August 2019.

The JC/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 29 pages in English translation.

2 Scope Preview

This standard specifies the terms and definitions, classification and marking, raw materials, requirements, test methods, inspection rules and markings, packaging, transportation and lifting, and storage of glass fiber reinforced plastic continuous winding sand pipe. This standard applies to the nominal diameter of 200mm~4000mm, the pressure class is 0.1MPa~3.2MPa, the ring stiffness class is 1250N/m2~10000N/m2 for water supply and drainage, water conservancy, irrigation and irrigation and other pipeline engineering glass fiber reinforced plastic continuous?? Winding sand pipe (hereinafter referred to as CWFP pipe), the maximum temperature of the medium does not exceed 50°C. Non-sand glass fiber reinforced plastic continuous winding pipe can be used in accordance with this standard.

JC/T 2538-2019 falls under ICS 83.120, in the field of rubber and plastics industries.

This catalogue holds 25 other JC/T standards in that field.

In this catalogue, JC/T standards carry edition years from 1973 to 2026.

3 About this standard

Issued by: Ministry of Industry and Information Technology

English translation: about 29 pages

Chinese original: about 43,431 characters

4 Related standards

Standards on related subjects:

GB/T 2567-2008 — Test methods for properties of resin casting body

JC/T 1026-2007 — Glass fiber reinforced thermosetting resin grating for supporting loads

GB/T 2577-2005 — Test method for resin content of glass fiber reinforced plastics

JC/T 2868-2025 — Metal anchor channel assemblies

JC/T 2867-2025 — Magnesium cementitious materials for building - Magnesium Sulfate Plate

JC/T 1092-2025 — Unsaturated polyester resin for mechanically transformed fiber reinforced plastics

5 Classification and status

International classification (ICS): 83.120

Chinese Standard Classification (CCS): Q 23

Prefix JC/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 29 pages — is available in the English PDF.

How to Download JC/T 2538-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
29 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JC/T 2538-2019

$545.00