JC/T 2096-2011Fiber glass-reinforced plastics high pressure line pipe (English PDF)
玻璃纤维增强塑料高压管线管
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for JC/T 2096-2011 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
December 20, 2011
Implementation date
July 1, 2012
Scope
JC/T 2096-2011 is the English-translated version of 玻璃纤维增强塑料高压管线管.
JC/T 2096-2011 — This standard specifies the glass fiber reinforced plastic high-pressure pipeline (hereinafter referred to as line pipe) terms and definitions, test methods, , classification and labeling, General requirements, requires inspection rules, published data and signs, packaging, transport and storage.
This standard applies to glass fiber reinforced materials, thermosetting resin as matrix material, filament winding, threaded or flanged connections, pressure rating of 3.
5 MPa-34 MPa, the oil and gas industry, transport fluid medium of glass fiber reinforced plastic high-pressure pipeline pipes and components, the maximum temperature maximum temperature to the manufacturer issued prevail.
Found what you need?
Document preview — JC/T 2096-2011
National Standard of the People's Republic of China
- ICS
- 83.120
- Classification
- Q 23
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 Classification
- 4.2 Designation
- 6 Test methods
- 7 Inspection Rules
- 9 Marking, Packaging, Transportation and Storage
1 Foreword
JC/T 2096-2011 was issued by Ministry of Industry and Information Technology on 20 December 2011 and has been in force since 1 July 2012.
The JC/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 17 pages in English translation.
2 Scope Preview
This standard specifies the glass fiber reinforced plastic high-pressure pipeline (hereinafter referred to as line pipe) terms and definitions, test methods, , classification and labeling, General requirements, requires inspection rules, published data and signs, packaging, transport and storage. This standard applies to glass fiber reinforced materials, thermosetting resin as matrix material, filament winding, threaded or flanged connections, pressure rating of 3. 5 MPa-34 MPa, the oil and gas industry, transport fluid medium of glass fiber reinforced plastic high-pressure pipeline pipes and components, the maximum temperature maximum temperature to the manufacturer issued prevail. Others may refer to.
JC/T 2096-2011 falls under ICS 83.120, in the field of rubber and plastics industries.
This catalogue holds 25 other JC/T standards in that field.
In this catalogue, JC/T standards carry edition years from 1973 to 2026.
3 About this standard
Issued by: Ministry of Industry and Information Technology
English translation: about 17 pages
Chinese original: about 25,284 characters
4 Related standards
Standards on related subjects:
GB/T 2567-2008 — Test methods for properties of resin casting body
JC/T 1026-2007 — Glass fiber reinforced thermosetting resin grating for supporting loads
GB/T 2577-2005 — Test method for resin content of glass fiber reinforced plastics
JC/T 2867-2025 — Magnesium cementitious materials for building - Magnesium Sulfate Plate
JC/T 1092-2025 — Unsaturated polyester resin for mechanically transformed fiber reinforced plastics
JC/T 2095.1-2011 — Sheet molding compound (SMC) panel. Part 1: Table tennis table panel
5 Classification and status
International classification (ICS): 83.120
Chinese Standard Classification (CCS): Q 23
Prefix JC/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
How to Download JC/T 2096-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JC/T 1020-2026 — Expanded perlite for thermal isolation of low temperature equipment
JC/T 1021.6-2026 — Methods for chemical analysis of nonmetal mineral and rock. Part 6: Methods for chemical analysis of fluorite
JC/T 2003-2026 — Precast concrete channels for irrigation and drainage
JC/T 2096-2011
$345.00