JB/T 9730-2011Diesel engine injection nozzle, plunger and delivery valve assemblies - Metallographic examination (English PDF)
柴油机喷油嘴偶件、柱塞偶件、出油阀偶件 金相检验
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 9730-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
April 1, 2012
Scope
JB/T 9730-2011 is the English-translated version of 柴油机喷油嘴偶件、柱塞偶件、出油阀偶件 金相检验.
JB/T 9730-2011 is the Chinese standard "Diesel engine injection nozzle, plunger and delivery valve assemblies - Metallographic examination".
Its scope clause reads: This standard specifies the examination of heat-treated metallographic structure of diesel injection nozzle, plunger for injection pump or high pressure supply pump and delivery valve (the effective thickness of parts is less than or equal to 12mm) for injection pump or high pressure supply pump.
This standard is applicable to the metallographic examination of GCr15 steel precision coupled parts; the metallographic examination of carburization and heat treatment of alloy structure steel needle valve body; and the metallographic examination of W6Mo5Cr4V2 and W18Cr4V steel needle valve.
Found what you need?
Document preview — JB/T 9730-2011
National Standard of the People's Republic of China
- Replacing
- JB/T 9730-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword i
- 1 Scope
- 2 Normative References
- 3 Metallographic Examination of GCr15 Steel Precision Coupled Parts
- 3.1 Technical Requirements
- 3.2 Examination Method
- 3.3 Grading Standard of Metallographic Microstructure
- 4 Metallographic Examination of Carburization and Heat Treatment of Alloy Structure Steel Needle Valve Body
- 4.1 Technical Requirements
- 4.2 Examination Method
- 4.3 Grading Standard of Metallographic Microstructure
- 5 Metallographic Examination of W6Mo5Cr4V2 and W18Cr4V Steel Needle Valve
- 5.1 Technical Requirements
- 5.2 Examination Method
- 5.3 Grading Standard of Grain Size and Superheat Degree
- Appendix B (Informative) Corrected Value of Sample’s Grade C Rockwell Hardness
1 Scope
This standard specifies the examination of heat-treated metallographic structure of diesel injection nozzle, plunger for injection pump or high pressure supply pump and delivery valve (the effective thickness of parts is less than or equal to 12mm) for injection pump or high pressure supply pump.
This standard is applicable to the metallographic examination of GCr15 steel precision coupled parts; the metallographic examination of carburization and heat treatment of alloy structure steel needle valve body; and the metallographic examination of W6Mo5Cr4V2 and W18Cr4V steel needle valve.
2 Normative References
The following documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendment) applies.
GB/T 3077 Alloy Structure Steels
GB/T 5264 Plunger of Diesel Fuel Injection Pump - Specifications
GB/T 5771 Delivery Valve of Diesel Fuel Injection Pump - Specifications
GB/T 5772 Injector Nozzle of Diesel - Specifications
GB/T 18254 High-carbon Chromium Bearing Steel
YB/T 5302 Steel Wire for High-speed Tool
3 Metallographic Examination of GCr15 Steel Precision Coupled Parts
3.1 Technical Requirements
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of JB/T 9730
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 9730-2011 | Diesel engine injection nozzle, plunger and delivery valve assemblies - Metallographic examination | current edition | Current |
| JB/T 9730-1999 | Diesel engine injection nozzle, plunger and delivery valve assemblies - Metallographic examination | previous edition | Superseded |
This page sells the current edition, JB/T 9730-2011. Earlier editions are listed for reference only.
How to Download JB/T 9730-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 9730-2011
$105.00