Valid

JB/T 9220.3-1999Chemical analysis methods for acid slag of cupola - Determination of ferrous oxide by potassium dichromate volumetric method (English PDF)

铸造化铁炉酸性炉渣化学分析方法 重铬酸钾容量法测定氧化亚铁量

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 9220.3-1999 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

June 24, 1999

Implementation date

June 24, 2000

Scope

JB/T 9220.3-1999 is the English-translated version of 铸造化铁炉酸性炉渣化学分析方法 重铬酸钾容量法测定氧化亚铁量.

JB/T 9220.3-1999 is the Chinese machinery industry standard covering chemical analysis methods for acid slag of cupola - Determination of ferrous oxide by potassium dichromate volumetric method.

It was issued on 24 June 1999 and has been in force since 24 June 2000, replacing JB/Z 284.3-1987. The document is under the responsibility of the Ministry of Industry and Information Technology.

This page is published from the official record of the 1999 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 9220.3-1999

National Standard of the People's Republic of China

Replacing
JB/Z 284.3-1987

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 9220.3-1999 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 June 1999 and has been in force since 24 June 2000.

It is one of 12 parts of the JB/T 9220 series.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

JB/T 9220.3-1999 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

4 Related standards

Other parts of this standard:

JB/T 9220-2023 — Analysis method of chemical composition of cast iron furnace slag

JB/T 9220.1-1999 — General rules and general provisions

JB/T 9220.2-1999 — Chemical analysis methods for acid slag of cupola - Determination of silicon dioxide by perchloric acid dehydration gravimetric method

JB/T 9220.4-1999 — Chemical analysis methods for acid slag of cupola - Determination of manganese monoxide by sodium arsenite-sodium nitrite volumetric method

JB/T 9220.5-1999 — Chemical analysis methods for acid slag of cupola - Determination of aluminium oxide by sodium fluoride-EDTA volumetric method

JB/T 9220.6-1999 — Chemical analysis methods for acid slag of cupola - Determination of calcium oxide by DDTC separation-EGTA volumetric method

JB/T 9220.7-1999 — Chemical analysis methods for acid slag of cupola - Determination of calcium oxide by potassium permanganate volumetric method

JB/T 9220.8-1999 — Chemical analysis methods for acid slag of cupola - Determination of magnesium oxide by DDTC separation-EDTA volumetric method

JB/T 9220.9-1999 — Chemical analysis methods for acid slag of cupola - Determination of phosphorus pentoxide by phosphovanadomolybdic yellow-methyl isobutyl ketone extraction photometric method

JB/T 9220.10-1999 — Chemical analysis methods for acid slag of cupola - Determination of sulfur by barium sulfate gravimetric method

JB/T 9220.11-1999 — Chemical analysis methods for acid slag of cupola - Determination of sulfur by combustion-potassium iodate volumetric method

Standards on related subjects:

GB/T 9438-2013 — Aluminum alloy castings

GB/T 9437-2009 — Heat resistant iron castings

JB/T 8583-2008 — Resin coated sand for foundry

JB/T 9222-2025 — Pulverized coal for green casting

JB/T 9221-2017 — Test methods for effective bentonite and effective coal dust in green moulding sand

5 Classification and status

Chinese Standard Classification (CCS): J 31

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

Editions of JB/T 9220.3

EditionTitleRevisionStatus
JB/T 9220.3-1999Chemical analysis methods for acid slag of cupola - Determination of ferrous oxide by potassium dichromate volumetric methodcurrent editionCurrent
JB/Z 284.3-1987Chemical analysis methods for acid slag of cupola - Determination of ferrous oxide by potassium dichromate volumetric methodprevious editionSuperseded

This page sells the current edition, JB/T 9220.3-1999. Earlier editions are listed for reference only.

How to Download JB/T 9220.3-1999

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 9220.3-1999

$85.00