JB/T 9168.4-1998General process instructions for machining - Planing and slotting (English PDF)
切削加工通用工艺守则 刨、插削
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 9168.4-1998 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
November 16, 1998
Implementation date
December 1, 1998
Scope
JB/T 9168.4-1998 is the English-translated version of 切削加工通用工艺守则 刨、插削.
JB/T 9168.4-1998 is the Chinese machinery industry standard covering general process instructions for machining - Planing and slotting. It was issued on 16 November 1998 and has been in force since 1 December 1998, replacing JB/Z 307.4-1988.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 1998 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 9168.4-1998
National Standard of the People's Republic of China
- Replacing
- JB/Z 307.4-1988
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 9168.4-1998 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 16 November 1998 and has been in force since 1 December 1998.
It is one of 13 parts of the JB/T 9168 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 9168.4-1998 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other parts of this standard:
JB/T 9168.1-1998 — General process instructions for cutting - General
JB/T 9168.2-1998 — Turning
JB/T 9168.3-1998 — Milling
JB/T 9168.5-1998 — Drilling
JB/T 9168.6-1998 — Boring
JB/T 9168.7-1998 — Broaching
JB/T 9168.8-1998 — Grinding
JB/T 9168.9-1998 — Gear machining
JB/T 9168.10-1998 — Numerically controlled machining
JB/T 9168.11-1998 — Blanking
JB/T 9168.12-1998 — Marking out
JB/T 9168.13-1998 — Bench work
Standards on related subjects:
GB/T 39252-2020 — Additive manufacturing—Specification for powder bed fusion process of metal materials
JB/T 10174-2008 — Quality inspection methods for shot peening of iron and steel parts
JB/T 9204-2008 — Metallographic examination of induction hardened steel parts
5 Classification and status
Chinese Standard Classification (CCS): J 38
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of JB/T 9168.4
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 9168.4-1998 | General process instructions for machining - Planing and slotting | current edition | Current |
| JB/Z 307.4-1988 | General process instructions for machining - Planing and slotting | previous edition | Superseded |
This page sells the current edition, JB/T 9168.4-1998. Earlier editions are listed for reference only.
How to Download JB/T 9168.4-1998
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 9168.5-1998 — General process instructions for machining - Drilling
JB/T 9168.3-1998 — General process instructions for machining - Milling
JB/T 9168.6-1998 — General process instructions for machining - Boring
Secure payment via Stripe
Payments accepted
JB/T 9168.4-1998
$65.00