JB/T 8774.5-1998Accessories for machine tool electrical systems - Fittings for armoured braided flexible metal conduits (English PDF)
机床电气系统辅件铠装编织金属软管管接头
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8774.5-1998 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 17, 1998
Implementation date
December 1, 1998
Scope
JB/T 8774.5-1998 is the English-translated version of 机床电气系统辅件铠装编织金属软管管接头.
JB/T 8774.5-1998 is the Chinese machinery industry standard covering accessories for machine tool electrical systems - Fittings for armoured braided flexible metal conduits.
It was issued on 17 July 1998 and has been in force since 1 December 1998, as a first edition. The document is under the responsibility of the Ministry of Industry and Information Technology.
This page is published from the official record of the 1998 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 8774.5-1998
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 8774.5-1998 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 17 July 1998 and has been in force since 1 December 1998.
It is one of 15 parts of the JB/T 8774 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 8774.5-1998 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other parts of this standard:
JB/T 8774.1-1998 — Cable ties
JB/T 8774.2-1998 — Cable tie mounts
JB/T 8774.3-1998 — Single-sided fixing pipe clamps
JB/T 8774.4-1998 — Adjustable fixing pipe clamps
JB/T 8774.6-1998 — End fittings for plastic-coated flexible metal conduits
JB/T 8774.7-1998 — Accessories for machine tool electrical systems - Fittings for rubber and PVC cables
JB/T 8774.8-1998 — Plastic fittings for rubber and PVC cables
JB/T 8774.9-1998 — Two-way right-angle flange pipe fittings
JB/T 8774.10-1998 — Two-way flange pipe fittings
JB/T 8774.11-1998 — Three-way flange pipe fittings
JB/T 8774.12-1998 — Single pipe mounting bases
JB/T 8774.13-1998 — Double pipe mounting bases
JB/T 8774.14-1998 — JDG earthing terminal blocks
JB/T 8774.15-1998 — Plastic-coated flexible metal conduits
5 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download JB/T 8774.5-1998
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 8774.6-1998 — Accessories for machine tool electrical systems - End fittings for plastic-coated flexible metal conduits
JB/T 8774.4-1998 — Accessories for machine tool electrical systems - Adjustable fixing pipe clamps
JB/T 8774.7-1998 — Accessories for machine tool electrical systems - Fittings for rubber and PVC cables
JB/T 8774.5-1998
$165.00