Valid

JB/T 8763-2013Electro-hydraulic Servo Compression Testing Machines for Cement - Technical Specification (English PDF)

电液伺服水泥压力试验机 技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 8763-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 25, 2013

Implementation date

September 1, 2013

Scope

JB/T 8763-2013 is the English-translated version of 电液伺服水泥压力试验机 技术条件.

JB/T 8763-2013 is the Chinese machinery industry standard covering electro-hydraulic Servo Compression Testing Machines for Cement - Technical Specification. It was issued on 25 April 2013 and has been in force since 1 September 2013, replacing JB/T 8763-2001.

The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2013 edition.

The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 8763-2013

National Standard of the People's Republic of China

Replacing
JB/T 8763-2001

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 8763-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.

It replaces the earlier edition JB/T 8763-2001, JB/T 8763-1998.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

JB/T 8763-2013 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

4 Related standards

Other editions:

JB/T 8763-2025 (later edition)

JB/T 8763-2001 (earlier edition)

JB/T 8763-1998 (earlier edition)

Standards on related subjects:

JB/T 8290-2011 — Non-destructive testing instruments - Magnetic particle flaw detectors

GB/T 17200-2008 — Technical specification for tensile, compression and flexural testing machines for rubber and plastics (constant rate of traverse)

GB/T 9239.1-2006 — Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances

JB/T 6866-2025 — Ceramic flexural strength testing machine - Technical specifications

JB/T 9389-2025 — Falling weight impact testing machines used for non-metallic materials - Technical specification

5 Classification and status

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

Editions of JB/T 8763

EditionTitleRevisionStatus
JB/T 8763-2013Electro-hydraulic Servo Compression Testing Machines for Cement - Technical Specificationcurrent editionCurrent
JB/T 8763-2001Electro-hydraulic Servo Compression Testing Machines for Cement - Technical Specificationprevious editionSuperseded

This page sells the current edition, JB/T 8763-2013. Earlier editions are listed for reference only.

How to Download JB/T 8763-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 8763-2013

$135.00