Valid

JB/T 8749.1-2007Voltage regulators - Part 1: General requirements and tests (English PDF)

调压器 第1部分:通用要求和试验

Preview PDF

This is a limited preview

Buy now to download the full PDF (20 pages)

Need quotation for your management?

Get a formal quotation for JB/T 8749.1-2007 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

August 28, 2007

Implementation date

February 1, 2008

Scope

JB/T 8749.1-2007 is the English-translated version of 调压器 第1部分:通用要求和试验.

JB/T 8749.1-2007 is the Chinese standard "Voltage regulators - Part 1: General requirements and tests".

Its scope clause reads: This part of JB/T 8749 specifies general requirements and tests for voltage regulators such as induction voltage regulator, variable transformer and magnetic control voltage regulator as well as voltage stabilizer (also referred to as automatic voltage regulator) with voltage regulator as main body.

As for various voltage regulators and voltage stabilizers (unless otherwise stated, they are referred to as voltage regulator), corresponding product standard may be formulated according to the characteristic and special requirements of corresponding product on the basis of this part.

This part is applicable to voltage regulator with rated voltage of 10KV or below and rated frequency of 50Hz. For voltage regulators with rated voltage above 10kV or other frequency or of other types, relevant provisions in this part may be made reference to.

Found what you need?

Document preview — JB/T 8749.1-2007

National Standard of the People's Republic of China

Replacing
JB/T 8749-1998

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • Foreword i
  • 1 Scope
  • 2 Normative References
  • 3 Terms and Definitions
  • 3.1 General Terms
  • 3.2 Winding
  • 3.3 Rated Value
  • 3.4 Loss and No-load Current
  • 3.5 Insulation
  • 3.6 Test Classification
  • 4 Product Classification, Product Model and Cooling Mode Marking and Rated Value
  • 4.1 Product Classification
  • 4.2 Product Model
  • 4.3 Cooling Mode Marking
  • 4.4 Rated Value
  • 5 Service Conditions
  • 5.1 Normal Service Conditions
  • 5.2 Requirements for Special Service Condition
  • 6 Technical Requirements
  • 6.1 Structure
  • 6.2 Permissible Deviation
  • 6.3 Insulation Level
  • 6.4 Temperature Rise
  • 6.5 Operating Mechanism
  • 6.6 Output Voltage Range
  • 6.7 Asymmetry of Output Voltage
  • 6.8 Stabilized Voltage Precision
  • 6.9 Characteristic of Output Voltage
  • 6.10 Waveform Distortion Factor of Output Voltage
  • 6.11 Duration for Voltage Regulating
  • 6.12 Response Time
  • 6.13 Overload Capability
  • 6.14 Sound Level
  • 6.15 Service Life
  • 6.16 Safety
  • 7 Test
  • 7.1 General Requirements
  • 7.2 Test Items
  • 7.3 Test Method
  • 8 Marking, Packaging, Transport, Storage and Accompanied Technical Documents
  • 8.1 Marking
  • 8.2 Packaging
  • 8.3 Transport
  • 8.4 Storage
  • 8.5 Accompanied Technical Documents
  • Annex A (Informative) Technical Requirements Required upon Enquiry and Order
  • Annex B (Normative) Temperature Correction of Load Loss for Voltage Regulators
  • Annex C (Normative) Temperature Rise Test for Voltage Regulators

1 Scope

This part of JB/T 8749 specifies general requirements and tests for voltage regulators such as induction voltage regulator, variable transformer and magnetic control voltage regulator as well as voltage stabilizer (also referred to as automatic voltage regulator) with voltage regulator as main body. As for various voltage regulators and voltage stabilizers (unless otherwise stated, they are referred to as voltage regulator), corresponding product standard may be formulated according to the characteristic and special requirements of corresponding product on the basis of this part.

This part is applicable to voltage regulator with rated voltage of 10KV or below and rated frequency of 50Hz.

For voltage regulators with rated voltage above 10kV or other frequency or of other types, relevant provisions in this part may be made reference to.

2 Normative References

The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of JB/T 8749. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this part of JB/T 8749. However parties to agreements based on this part of JB/T 8749 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.

GB/T 321-2005 Preferred Numbers - Series of Preferred Numbers (IS0 3: 1973, IDT)

GB 1094.1 Power Transformers - Part 1: General (GB 1094.1-1996, eqv IEC 60076-1: 1993)

GB 1094.2 Power Transformers - Part 2: Temperature Rise (GB 1094.2-1996, eqv IEC 60076-2: 1993)

GB/T 1094.10 Power Transformers - Part 10: Determination of Sound Levels (GB/T 1094.10-2003, IEC 60076-10: 2001, MOD)

GB 1094.11-2007 Power Transformers - Part 11: Dry-type Transformers (IEC 60076-11: 2004, MOD)

GB 2536 Transformer Oils (GB 2536-1990, neq IEC 60296: 1982)

GB/T 2900.1-1992 Electrotechnical Terminology - Fundamental Terms

GB/T 2900.15-1997 Electrotechnical Terminology - Transformer, Instrument Transformer, Voltage Regulator and Reactor (ncq IEC 60050-421: 1990: IEC 60050-321: 1986)

GB/T 2900.18-1992 Electrotechnical Terminology - Low Voltage Apparatus (eqv IEC 60050-441: 1984)

GB 4208 Degrees of Protection Provided by Enclosure (IP Code) (GB 4208-1993.eqv IEC 60529: 1989)

GB/T 5273 Terminals for Transformers, High-voltage Apparatus and Bushings (GB/T 5273-1985, neq IEC 60518: 1975)

GB/T 13384-1992 General Specification for Packaging of Mechanical and Electrical Products […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 8749.1

EditionTitleRevisionStatus
JB/T 8749.1-2007Voltage regulators - Part 1: General requirements and testscurrent editionCurrent
JB/T 8749-1998Voltage regulators - Part 1: General requirements and testsprevious editionSuperseded

This page sells the current edition, JB/T 8749.1-2007. Earlier editions are listed for reference only.

How to Download JB/T 8749.1-2007

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
20 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 8749.1-2007

$285.00