JB/T 8671-1997YBGB and YBGB-W series explosion-proof three-phase induction motors for in-line pumps - Technical specifications (frame sizes 80 to 315) (English PDF)
YBGB、YBGB-W系列管道泵用隔爆型三相异步电动机 技术条件(机座号80~315)
This is a limited preview
Buy now to download the full PDF (27 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8671-1997 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 17, 1997
Implementation date
February 1, 1998
Scope
JB/T 8671-1997 is the English-translated version of YBGB、YBGB-W系列管道泵用隔爆型三相异步电动机 技术条件(机座号80~315).
JB/T 8671-1997 is the Chinese standard "YBGB and YBGB-W series explosion-proof three-phase induction motors for in-line pumps - Technical specifications (frame sizes 80 to 315)".
Its scope clause reads: This standard specifies the type, the basic parameters and dimensions, the technical requirements, the test methods and inspection rules, the marking, the packaging and the warranty period of the YBGB and YBGB-W series of flameproof three-phase asynchronous motors for pipeline pumps.
It applies to the YBGB series of flameproof three-phase asynchronous motors for pipeline pumps from 0,55 kW to 200 kW, hereinafter referred to as the motors, and to the YBGB-W series of flameproof three-phase asynchronous motors for pipeline pumps, hereinafter referred to as the W type motors.
The explosion protection of this series complies with GB 3836.2 and is of the flameproof type, with the explosion protection markings d IIA T4 and d IIB T4. The motors are suitable for places where an explosive mixture of air with a flammable gas or vapour of factory group IIA or IIB and temperature class T1 to T4 may be present.
Found what you need?
Document preview — JB/T 8671-1997
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Subject content and scope
- 2 Normative references
- 3 Type, basic parameters and dimensions
- 3.1 Degree of protection of the enclosure
- 3.2 Method of cooling
- 3.3 Construction and mounting arrangement
- 3.4 Rating
- 3.5 Rated frequency and rated voltage
- 3.6 Rated power ratings
- 3.7 Correspondence between frame number, speed and power
- 3.8 Dimensions and tolerances of the motor
- Table 1 Correspondence between the frame number and the speed and power of the motor
- Table 2 Mounting dimensions, tolerances and overall dimensions of the motor
1 Subject content and scope
This standard specifies the type, the basic parameters and dimensions, the technical requirements, the test methods and inspection rules, the marking, the packaging and the warranty period of the YBGB and YBGB-W series of flameproof three-phase asynchronous motors for pipeline pumps.
It applies to the YBGB series of flameproof three-phase asynchronous motors for pipeline pumps from 0,55 kW to 200 kW, hereinafter referred to as the motors, and to the YBGB-W series of flameproof three-phase asynchronous motors for pipeline pumps, hereinafter referred to as the W type motors.
The explosion protection of this series of motors complies with GB 3836.2 and is of the flameproof type. The explosion protection markings are d IIA T4 and d IIB T4. The motors are suitable for places where an explosive mixture of air with a flammable gas or vapour of factory group IIA or IIB and temperature class T1 to T4 may be present.
2 Normative references
The clauses of the following standards become clauses of this standard through being referred to in it. At the time of publication the editions shown were valid. All standards are revised, and the parties using this standard should consider the possibility of using the latest editions of the standards listed below.
GB 191-90 Packaging - Pictorial marking for handling of goods
GB/T 755-87 Rotating electrical machines - Basic technical requirements
GB/T 997-81 Codes for the construction and the mounting arrangement of electrical machines
GB/T 1032-85 Test methods for three-phase asynchronous motors
GB 1971-80 Terminal markings and direction of rotation of electrical machines
GB/T 1993-1993 Methods of cooling for rotating electrical machines
GB/T 2423.1-89 Basic environmental testing procedures for electric and electronic products - Test A: Cold
GB/T 2423.4-1993 Basic environmental testing procedures for electric and electronic products - Test Db: Damp heat, cyclic
GB/T 2900.25-1994 Electrotechnical terminology - Rotating electrical machines
GB 3836.1-83 Explosion-proof electrical apparatus for explosive atmospheres - General requirements
GB 3836.2-83 Explosion-proof electrical apparatus for explosive atmospheres - Flameproof enclosure d
GB/T 4772.1-84 Dimensions and output series for rotating electrical machines - Frame numbers 36 to 400 and flange numbers FF55 to FF1080 or FT55 to FT1080
GB/T 4826-84 Power ratings of electrical machines
GB/T 4942.1-85 Degrees of protection provided by the enclosures of rotating electrical machines
GB 10069.1 to 10069.3-88 Methods of measurement and limits of the noise of rotating electrical machines
GB 10068.1 to 10068.2-88 Methods of measurement and limits of the vibration of rotating electrical machines
GB/T 12351-1990 Environmental technical requirements for rotating electrical machines of the tropical type
JB 2420-78 Painting of outdoor and anti-corrosion electrical products
JB/Z 294-87 Test method for the inter-turn insulation of random wound windings of low voltage AC machines
JB/Z 346-89 Test limits for the inter-turn insulation of random wound windings of low voltage AC machines
ZB K04 003-89 Environmental technical requirements for indoor and outdoor anti-corrosion explosion-proof asynchronous motors, frame numbers 45 to 710
3 Type, basic parameters and dimensions
3.1 Degree of protection of the motor enclosure: IP44 for indoor motors and IP54 or IP55 for the W type, in accordance with GB 4942.1.
3.2 Method of cooling of the motor: IC411, see GB/T 1993.
3.3 Construction and mounting arrangement of the motor: IMV1, see GB/T 997.
3.4 Rating of the motor: a continuous rating based on continuous duty S1.
3.5 Rated frequency of the motor: 50 Hz. Rated voltages: 380 V, 660 V and 380/660 V.
3.6 The motors shall be made to the following rated power ratings: 0,55, 0,75, 1,1, 1,5, 2,2, 3, 4, 5,5, 7,5, 11, 15, 18,5, 22, 30, 37, 45, 55, 75, 90, 110, 132, 160 and 200 kW.
3.7 The correspondence between the frame number of the motor and its speed and power shall be as given in Table 1.
Table 1, power in kilowatts at a synchronous speed of 3 000 r/min and of 1 500 r/min. Frame 80-1: 0,75 and 0,55. Frame 80-2: 1,1 and 0,75. Frame 90S: 1,5 and 1,1. Frame 90L: 2,2 and 1,5. Frame 100L-1: 3 and 2,2. Frame 100L-2: 3 and 3. Frame 112M: 4 and 4. Frame 132S-1: 5,5 and 5,5. Frame 132S-2: 7,5 and 5,5. Frame 132M: not made, and 7,5. Frame 160M-1: 11 and 11. Frame 160M-2: 15 and 11. Frame 160L: 18,5 and 15. Frame 180M: 22 and 18,5. Frame 180L: not made, and 22. Frame 200L-1: 30 and 30. Frame 200L-2: 37 and 30. Frame 225S: not made, and 37. Frame 225M: 45 and 45. Frame 250M: 55 and 55. Frame 280S: 75 and 75. Frame 280M: 90 and 90. Frame 315S: 110 and 110. Frame 315M: 132 and 132. Frame 315L1: 160 and 160. Frame 315L2: 200 and 200.
Note to Table 1: the figures 1 and 2 after S, M and L stand for the different powers available at the same frame number and speed.
3.8.1 The mounting dimensions and tolerances of the motor shall comply with Table 2, and the overall dimensions shall be not greater than those given in Table 2.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 27 pages — is available in the English PDF.
Similar standards
How to Download JB/T 8671-1997
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 8671-1997
$550.00