Valid

JB/T 8566-2008Rolling bearings - Carbon steel bearing parts - Technical requirements for heat treatment (English PDF)

滚动轴承 碳钢轴承零件 热处理技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 8566-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

March 12, 2008

Implementation date

September 1, 2008

Scope

JB/T 8566-2008 is the English-translated version of 滚动轴承 碳钢轴承零件 热处理技术条件.

JB/T 8566-2008 is the Chinese standard "Rolling bearings - Carbon steel bearing parts - Technical requirements for heat treatment".

Its scope clause reads: This standard specifies the technical requirements, inspection methods and inspection rules for the bearing rings made from 45 steel meeting the requirements of GB/T 699-1999 or the quality carbon structural steels with equivalent performance after forging or forging annealing and quenching and tempering as well as the technical requirements, inspection methods and inspection rules for the carburizing, quenching and tempering of the carbon steel balls made from 10 and 15 quality carbon structural steels or carbon steels with the similar carbon content and mechanical property.

This standard is applicable to the heat treatment quality inspection of bearing parts made from above-mentioned steels. Bearing parts with special requirements and carbon steel balls for other purposes shall comply with the requirements of product drawing.

Found what you need?

Document preview — JB/T 8566-2008

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • Foreword
  • 1 Scope
  • 2 Normative References
  • 3 Technical Requirements of Rings
  • 3.1 Forging or Annealing
  • 3.2 Quenching and Tempering
  • 4 Technical Requirements of Carbon Steel Balls after Carburized Quenching and Tempering
  • 4.1 Surface Carbon Content
  • 4.2 Hardness
  • 4.3 Effective Hardening Depth
  • 4.4 Microstructure
  • 4.5 Cracks
  • 4.6 Decarburized Layer and Soft Spot
  • 4.7 Crushing Load
  • 5 Inspection Methods and Inspection Rules
  • Appendix A (Normative) Crushing Load Values after Carburized Quenching and Tempering and of Finished Carbon Steel Balls

1 Scope

This standard specifies the technical requirements, inspection methods and inspection rules for the bearing rings made from 45 steel meeting the requirements of GB/T 699-1999 or the quality carbon structural steels with equivalent performance after forging or forging annealing and quenching and tempering as well as the technical requirements, inspection methods and inspection rules for the carburizing, quenching and tempering of the carbon steel balls made from 10 and 15 quality carbon structural steels or carbon steels with the similar carbon content and mechanical property.

This standard is applicable to the heat treatment quality inspection of bearing parts made from above-mentioned steels. Bearing parts with special requirements and carbon steel balls for other purposes shall comply with the requirements of product drawing.

2 Normative References

The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.

GB/T 230.1-2004 Metallic Rockwell Hardness Test-Part 1: Test Method (Scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-1: 1999, MOD)

GB/T 231.1-2002 Metallic Materials - Brinell Hardness Test - Part 1: Test Method (eqv ISO 6506-1: 1999)

GB/T 699-1999 Quality Carbon Structural Steels

JB/T 1255-2001 Specification for Heat-treatment of Rolling Bearing Parts Made from High Carbon Chromium Steel

JB/T 7361-2007 Rolling Bearings-Test Method for Hardness of Parts

JB/T 7362-2007 Rolling Bearings - Determination of Decarburized Depth for Parts

JB/T 8881-2001 Specifications for Carburizing Heat Treatment of Rolling Bearing Parts […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download JB/T 8566-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 8566-2008

$199.00