Valid

JB/T 8524-1997Positive displacement air compressors - Safety requirements (English PDF)

容积式空气压缩机 安全要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (21 pages)

Need quotation for your management?

Get a formal quotation for JB/T 8524-1997 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

March 4, 1997

Implementation date

October 1, 1997

Scope

JB/T 8524-1997 is the English-translated version of 容积式空气压缩机 安全要求.

JB/T 8524-1997 is the Chinese standard "Positive displacement air compressors - Safety requirements". Its scope clause reads: This standard specifies the safety requirements and/or measures for positive-displacement air compressors, hereinafter referred to as "air compressors", and the methods of inspecting and judging their safety performance.

The safety requirements and/or measures it contains address all the main hazards of an air compressor, with the exception of the risk of fracture arising from the material of internal parts.

It applies to air compressors used in a general environment that require safety certification.

It does not apply to: a) air compressors with a drive power below 1,1 kW; b) air compressors with a discharge pressure not greater than 0,034 MPa; c) air compressors supplying air for special purposes such as breathing, diving and surgery; d) air compressors for air braking systems; e) air compressors for process plant and air separation plant.

Found what you need?

Document preview — JB/T 8524-1997

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Definitions

1 Scope

This standard specifies the safety requirements and/or measures for positive-displacement air compressors, hereinafter referred to as "air compressors", and the methods of inspecting and judging their safety performance.

The safety requirements and/or measures it contains address all the main hazards of an air compressor, with the exception of the risk of fracture arising from the material of internal parts.

It applies to air compressors used in a general environment that require safety certification. It does not apply to: a) air compressors with a drive power below 1,1 kW; b) air compressors with a discharge pressure not greater than 0,034 MPa; c) air compressors supplying air for special purposes such as breathing, diving and surgery; d) air compressors for air braking systems; e) air compressors for process plant and air separation plant.

This standard is a non-equivalent adoption of the American standard ASME B19.1-1990 "Safety standard for air compressor systems", taking over the safety requirements of that standard for positive-displacement air compressors. Where that standard gives specific values they have all been adopted; where it states a requirement without a specific figure, a specific figure or quantitative requirement has been given on the basis of domestic product standards; the purely advisory requirements of that standard have not been adopted. This standard sets out the specific mechanical safety requirements for air compressors and the methods of inspecting them, and stands alongside GB 10892-89 "Safety rules and operating procedures for stationary air compressors". It is a mandatory standard, in force from 1 October 1997; from 1 October 1998 every positive-displacement air compressor manufactured, sold or used in China is required to comply with it. Annex A is normative.

2 Normative references

The provisions contained in the following standards become provisions of this standard through reference in this standard. The editions shown were valid at the time of publication of this standard. All standards are subject to revision, and the parties using this standard should consider the possibility of applying the latest editions of the standards listed below.

GB 150-89 Steel pressure vessels

GB 151-89 Steel shell-and-tube heat exchangers

GB 191-90 Packaging - Pictorial marking for handling of goods

GB 4208-93 Degrees of protection provided by enclosures (IP code)

GB/T 4975-1995 Positive-displacement compressors - Terminology - General

GB 4980-85 Determination of the sound power level of positive-displacement compressors - Engineering method

GB 6075-85 Basis for the preparation of mechanical vibration standards

GB 7184-87 Methods of measuring the vibration of small and medium power diesel engines

GB 7777-87 Measurement and evaluation of the mechanical vibration of reciprocating piston compressors

GB 7786-87 Sound power level limits for air compressors and diaphragm compressors for power use

GB 10397-89 Vibration grading of small and medium power diesel engines

GB/T 13276-91 Inlet filters and silencers for positive-displacement air compressors

GB/T 13278-91 Specification for dry screw air compressors for general use

GB/T 13279-91 Specification for stationary reciprocating piston air compressors for general use

GB/T 13306-91 Nameplates

GB/T 13928-92 Miniature reciprocating piston air compressors

GB 14711-93 General safety requirements for small and medium rotating electrical machines

GB/T 15706.1-1995 Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology

JB/T 3771-92 Specification for the chassis of portable compressors

JB/T 4223-94 Specification for vehicle-mounted positive-displacement air compressor units

JB/T 4253-93 Oil-injected sliding vane air compressors for general use

JB/T 6430-92 Oil-injected screw air compressors for general use

JB/T 6441-92 Safety valves for compressors

JB/T 6539-92 Steel pressure vessels for miniature air compressors

JB/T 6905-93 Diaphragm compressors

JB/T 6907-93 Specification for motor-driven compressors

JB/T 7662-95 Positive-displacement compressors - Terminology - Rotary compressors

ZB J72 013.2-88 Specification for marine medium-pressure reciprocating piston air compressors

ZB J72 014.2-88 Specification for oil-free reciprocating piston air compressors

ZB J72 025-89 Reciprocating compressors - Terminology

3 Definitions

The terms and definitions relating to air compressors are those of GB/T 4975, JB/T 7662 and ZB J72 025.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 8524-1997

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
21 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 8524-1997

$509.00