JB/T 8293-2014Floating oil seals (English PDF)
浮动油封
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8293-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
JB/T 8293-2014 is the English-translated version of 浮动油封.
JB/T 8293-2014 is the Chinese machinery industry standard covering floating oil seals. It was issued on 6 May 2014 and has been in force since 1 October 2014, replacing JB/T 8293.2-1999.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2014 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 8293-2014
National Standard of the People's Republic of China
- Replacing
- JB/T 8293.2-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 8293-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.
It replaces the earlier edition JB/T 8293-1995.
It is one of 3 parts of the JB/T 8293 series.
2 Scope Preview
JB/T 8293-2014 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other parts of this standard:
JB/T 8293.1-1999 — Floating seals
JB/T 8293.2-1999 — Floating seals - Test methods
Other editions:
JB/T 8293-2025 (later edition)
JB/T 8293-1995 (earlier edition)
Standards on related subjects:
GB/T 8419-2023 — Earth-moving machinery - Laboratory evaluation of operator seat vibration
JB/T 8816-1998 — Construction machinery - Drive axles - Technical specifications
GB/T 13752-1992 — Design rules for tower cranes
JB/T 7698-2025 — Wheel Spokes and Hubs of Tire Loaders - Installation dimensions
JB/T 5953-2025 — Hydraulic Hammer
JB/T 8291-2013 — Earth-moving machinery - Buckets of cable excavators - Volumetric ratings
5 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Editions of JB/T 8293
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 8293-2014 | Floating oil seals | current edition | Current |
| JB/T 8293.2-1999 | Floating oil seals | previous edition | Superseded |
This page sells the current edition, JB/T 8293-2014. Earlier editions are listed for reference only.
How to Download JB/T 8293-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 8293-2014
$175.00