Valid

JB/T 7555-2008Inertia vibrating feeders (English PDF)

惯性振动给料机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 7555-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

March 12, 2008

Implementation date

September 1, 2008

Scope

JB/T 7555-2008 is the English-translated version of 惯性振动给料机.

JB/T 7555-2008 is the Chinese standard "Inertia vibrating feeders". Its scope clause reads: This standard specifies the types, basic parameters, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of inertia vibrating feeder (hereinafter referred to as feeder).

This standard is applicable to inertia vibrating feeder driven by inertia vibrator, which uniformly and continuously feeds loose blocky, powdery and granular materials into material receiving device through storage bunker or hopper.

Feeder may be installed horizontally or obliquely. Its clauses include types and basic parameters.

Found what you need?

Document preview — JB/T 7555-2008

National Standard of the People's Republic of China

Replacing
JB/T 7555-1994

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • Foreword
  • 1 Scope
  • 2 Normative References
  • 3 Types and Basic Parameters
  • 3.1 Types
  • 3.2 Models
  • 3.3 Basic Parameters and Dimensions
  • 3.4 Marking Examples
  • 4 Technical Requirements
  • 4.1 Operating Conditions
  • 4.2 Feeder Performances
  • 4.3 Chute Body
  • 4.4 Inertia Vibrator
  • 4.5 Isolation Spring
  • 4.6 Other Requirements
  • 5 Test Methods
  • 6 Inspection Rules
  • 7 Marking, Packaging, Transportation and Storage

1 Scope

This standard specifies the types, basic parameters, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of inertia vibrating feeder (hereinafter referred to as feeder).

This standard is applicable to inertia vibrating feeder driven by inertia vibrator, which uniformly and continuously feeds loose blocky, powdery and granular materials into material receiving device through storage bunker or hopper. Feeder may be installed horizontally or obliquely.

2 Normative References

The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding amending errors in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies.

GB 755 Rotating Electrical Machines - Rating and Performance (GB 755-2000, idt IEC 60034-1:1996)

GB/T 1239.1-1989 Cold Coiled Helical Tension Springs - Technical Specifications (neq JIS B 2708:1981)

GB/T 3768 Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Pressure - Survey Method Using an Enveloping Measurement Surface Over a Reflecting Plane (GB/T 3768-1996, eqv ISO 3746:1995)

GB/T 8923-1988 Rust Grades and Preparation Grades of Steel Surfaces Before Application of Paints and Related Products (eqv ISO 8501-1:1988)

GB/T 9286-1998 Paints and Varnishes - Cross Cut Test for Films (eqv ISO 2409:1992)

GB 10068 Mechanical Vibration of Certain Machines with Shaft Heights 56mm and Higher - Measurement, Evaluation and Limits of Vibration (GB 10068-2000, idt IEC 60034-14:1996)

GB 10069.3 Measurement of Airborne Noise Emitted by Rotating Electrical Machines and the Noise Limits - Part 3: Noise Limits (GB 10069.3-2006, IEC 60034-9:1997, IDT)

3 Types and Basic Parameters

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 7555

EditionTitleRevisionStatus
JB/T 7555-2008Inertia vibrating feederscurrent editionCurrent
JB/T 7555-1994Inertia vibrating feedersprevious editionSuperseded

This page sells the current edition, JB/T 7555-2008. Earlier editions are listed for reference only.

How to Download JB/T 7555-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 7555-2008

$85.00