Valid

JB/T 7450-1994Modular fixtures - Assessment method for economic benefits (English PDF)

组合夹具经济效益评估方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 7450-1994 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

September 6, 1994

Implementation date

September 6, 1994

Scope

JB/T 7450-1994 is the English-translated version of 组合夹具经济效益评估方法.

JB/T 7450-1994 is a recommended Chinese machinery industry standard that gives the method for assessing the economic benefit of modular fixtures. It sets out how the economic result of working with modular fixture systems is to be evaluated.

The method is for use by any organisation that uses such fixtures, both for economic analysis and for advance estimates. In the Chinese classification the document belongs with the other standards on jigs, fixtures and tooling. JB 3624 and JB/Z 199 are cited in it. It was issued on 6 September 1994.

Found what you need?

Document preview — JB/T 7450-1994

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 7450-1994 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 September 1994 and took effect the same day.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard that gives the method for assessing the economic benefit of modular fixtures. It sets out how the economic result of working with modular fixture systems is to be evaluated. The method is for use by any organisation that uses such fixtures, both for economic analysis and for advance estimates. In the Chinese classification the document belongs with the other standards on jigs, fixtures and tooling. JB 3624 and JB/Z 199 are cited in it.

JB/T 7450-1994 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,316 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 Normative references

JB 3624

JB/Z 199

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Classification and status

Chinese Standard Classification (CCS): J 45

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

JB 3624 · JB/Z 199

Similar standards

How to Download JB/T 7450-1994

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 7450-1994

$225.00