Valid

JB/T 7384.9-1994Fasteners - Calipers for the thickness between slot bottom and bearing surface of slotted nuts (English PDF)

紧固件 开槽螺母槽底与支承面间厚度卡规

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 7384.9-1994 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

July 26, 1994

Implementation date

July 1, 1995

Scope

JB/T 7384.9-1994 is the English-translated version of 紧固件 开槽螺母槽底与支承面间厚度卡规.

JB/T 7384.9-1994 is part 9 of a series of recommended Chinese mechanical and machinery industry standards on fastener gauges, and it covers the caliper used to measure the thickness between the bottom of the slot and the bearing surface of a slotted nut.

It fixes the type of this gauge and its dimensions. Its use is tied to item 21 in Table 2 of ZB J13 002.1, which it cites along with GB 1957 and GB 3103.1. The Chinese classification J13 places it with fasteners. Issued on 26 July 1994, it has applied since 1 July 1995.

Found what you need?

Document preview — JB/T 7384.9-1994

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 7384.9-1994 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 26 July 1994 and has been in force since 1 July 1995.

It is one of 18 parts of the JB/T 7384 series.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is part 9 of a series of recommended Chinese mechanical and machinery industry standards on fastener gauges, and it covers the caliper used to measure the thickness between the bottom of the slot and the bearing surface of a slotted nut. It fixes the type of this gauge and its dimensions. Its use is tied to item 21 in Table 2 of ZB J13 002.1, which it cites along with GB 1957 and GB 3103.1. The Chinese classification J13 places it with fasteners.

JB/T 7384.9-1994 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,316 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 Normative references

GB 1957

GB 3103.1

4 Where this standard sits

It cites 2 standards, listed in full above.

It is one part of the JB/T 7384 series, of which this catalogue holds 18 parts.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other parts of this standard:

JB/T 7384.1-1994 — Fasteners - No-go gauges for across-corners width

JB/T 7384.2-1994 — Fasteners - Gauges for head height of countersunk and raised countersunk heads

JB/T 7384.3-1994 — Fasteners - Gauges for head height and thickness between slot and bearing surface

JB/T 7384.4-1994 — Fasteners - Gauges for wrenching height

JB/T 7384.5-1994 — Fasteners - Hexagon socket gauges

JB/T 7384.6-1994 — Fasteners - Go gauges for across-corners width of hexagon sockets

JB/T 7384.7-1994 — Fasteners - Plug gauges for slot width

JB/T 7384.8-1994 — Fasteners - Plug gauges for slot depth

JB/T 7384.10-1994 — Fasteners - Checking fixtures for symmetry of shank and head pin holes, symmetry of slotted nut slots and perpendicularity of split pin holes

JB/T 7384.11-1994 — Fasteners - Perpendicularity gauges for nut threads

JB/T 7384.12-1994 — Fasteners - Gauges for straightness of screw shanks

JB/T 7384.13-1994 — Fasteners - Gauges for circumscribed circle diameter of thread rolling locking screws

JB/T 7384.14-1994 — Fasteners - Calipers for minor diameter of wood screw threads

JB/T 7384.15-1994 — Fasteners - Ring gauges for checking clearance and offset of split pin legs

JB/T 7384.16-1994 — Fasteners - Plug gauges for rivet hole diameter

JB/T 7384.17-1994 — Fasteners - Plug gauges for rivet hole depth

JB/T 7384.18-1994 — Fasteners - Gauges for washer hole diameter

7 Classification and status

Chinese Standard Classification (CCS): J 13

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

GB 1957 · GB 3103.1

Similar standards

How to Download JB/T 7384.9-1994

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 7384.9-1994

$105.00