JB/T 7363-2011Rolling bearings - Low carbon steel bearing parts - Technical requirements for carbonitriding heat treatment (English PDF)
滚动轴承 低碳钢轴承零件碳氮共渗 热处理技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7363-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
August 15, 2011
Implementation date
November 1, 2011
Scope
JB/T 7363-2011 is the English-translated version of 滚动轴承 低碳钢轴承零件碳氮共渗 热处理技术条件.
JB/T 7363-2011 is the Chinese standard "Rolling bearings - Low carbon steel bearing parts - Technical requirements for carbonitriding heat treatment".
Its scope clause reads: This standard specifies the technical requirements and inspection method for hardening depth, hardness and microstructure of the needle bearing drawn cup and cage (hereinafter referred to as “bearing parts”) made from (08, 10, 15 and 20) high-quality carbon structural steels meeting the requirements of GB/T 699-1999 and 15CrMo and 20CrMo alloy structure steels meeting the requirements of GB/T 3077-1999, after carbonitriding heat-treatment.
This standard is applicable to the carbonitriding heat-treatment (effective hardening depth less than or equal to 0.30 mm) quality inspection of the bearing parts made from the above-mentioned steel types or the high-quality carbon structural steels and alloy structure steels with the equivalent performance.
The carburizing heat-treatment quality inspection of the steel bearing parts with gross hardening depth less than or equal to 0.30 mm may be used by making reference.
Found what you need?
Document preview — JB/T 7363-2011
National Standard of the People's Republic of China
- Replacing
- JB/T 7363-2002
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 4 Technical Requirements
- 4.1 Hardening Depth
- 4.2 Hardness
- 4.3 Microstructure
- 4.4 Miscellaneous
- 5 Inspection Methods
- 5.1 Inspection Sample
- 5.2 Determination of Hardening Depth
- 5.3 Hardness Test
- 5.4 Microstructure Inspection
- Appendix A(Normative) Explanations on Grading Figure for Microstructure of Carbonitriding Layer
1 Scope
This standard specifies the technical requirements and inspection method for hardening depth, hardness and microstructure of the needle bearing drawn cup and cage (hereinafter referred to as “bearing parts”) made from (08, 10, 15 and 20) high-quality carbon structural steels meeting the requirements of GB/T 699-1999 and 15CrMo and 20CrMo alloy structure steels meeting the requirements of GB/T 3077-1999, after carbonitriding heat-treatment.
This standard is applicable to the carbonitriding heat-treatment (effective hardening depth less than or equal to 0.30 mm) quality inspection of the bearing parts made from the above-mentioned steel types or the high-quality carbon structural steels and alloy structure steels with the equivalent performance. The carburizing heat-treatment quality inspection of the steel bearing parts with gross hardening depth less than or equal to 0.30 mm may be used by making reference.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
GB/T 699-1999 Quality Carbon Structural Steels
GB/T 3077-1999 Alloy Structure Steels
GB/T 4340.1-2009 Metallic Materials-Vickers Hardness Test-Part 1: Test Method (ISO 6507-1:1997, MOD)
GB/T 9451-2005 Determination of Total or Effective Thickness of Thin Surface Hardened Layers of Steel Parts
JB/T 7361-2007 Rolling Bearings-Test Method for Hardness of Parts […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of JB/T 7363
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7363-2011 | Rolling bearings - Low carbon steel bearing parts - Technical requirements for carbonitriding heat treatment | current edition | Current |
| JB/T 7363-2002 | Rolling bearings - Low carbon steel bearing parts - Technical requirements for carbonitriding heat treatment | previous edition | Superseded |
This page sells the current edition, JB/T 7363-2011. Earlier editions are listed for reference only.
How to Download JB/T 7363-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 7363-2011
$169.00