JB/T 7140-2011Livestock dipping machinery (English PDF)
牲畜药浴机械
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7140-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
August 15, 2011
Implementation date
November 1, 2011
Scope
JB/T 7140-2011 is the English-translated version of 牲畜药浴机械.
JB/T 7140-2011 is a recommended Chinese machinery industry standard for livestock dipping machinery. It fixes the types, models and basic parameters of the machines and sets technical requirements, test methods and inspection rules, along with marking, packaging, transport and storage.
The machinery it applies to treats cattle and sheep by spraying from upper and lower nozzles, and dipping machines of other types may be made to it by reference.
It carries Chinese classification B92 and international classification 65.060.99 and comes from the Ministry of Industry and Information Technology. It replaces the three earlier parts JB/T 7140.1-1993, JB/T 7140.2-1993 and JB/T 7140.3-1993, and quotes GB/T 5667-2008 and JB/T 8581 among others.
Found what you need?
Document preview — JB/T 7140-2011
National Standard of the People's Republic of China
- ICS
- 65.060.99
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 7140-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 15 August 2011 and has been in force since 1 November 2011.
It is one of 4 parts of the JB/T 7140 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for livestock dipping machinery. It fixes the types, models and basic parameters of the machines and sets technical requirements, test methods and inspection rules, along with marking, packaging, transport and storage. The machinery it applies to treats cattle and sheep by spraying from upper and lower nozzles, and dipping machines of other types may be made to it by reference. It carries Chinese classification B92 and international classification 65.060.99 and comes from the Ministry of Industry and Information Technology. It replaces the three earlier parts JB/T 7140.1-1993, JB/T 7140.2-1993 and JB/T 7140.3-1993, and quotes GB/T 5667-2008 and JB/T 8581 among others.
JB/T 7140-2011 falls under ICS 65.060.99, in the field of agriculture.
This catalogue holds 368 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 321-2005 — Preferred numbers -- Series of preferred numbers
GB/T 5662-1985 — End-suction centrifugal pumps (rating 16bar)--Designation, nominal duty point and dimensions
GB/T 5667-2008 — Productive testing methods for agricultural machinery
GB/T 13306
JB/T 5673-1991 — Painting of tractors and agricultural and forestry machinery - General technical specifications
JB/T 8581
4 Where this standard sits
It cites 6 standards, among them GB/T 321-2005, GB/T 5662-1985, GB/T 5667-2008, listed in full above.
One other standard in this catalogue cites it: JB/T 8402-2011.
It is one part of the JB/T 7140 series, of which this catalogue holds 4 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 7140.1-1993 — Livestock dipping machinery - Types and basic parameters
JB/T 7140.2-1993 — Livestock dipping machinery - Technical specifications
JB/T 7140.3-1993 — Livestock dipping machinery - Test methods
Standards on related subjects:
GB/T 2818-2014 — Submersible motors for deep wells
GB 10395.19-2010 — Agricultural and forestry machinery - Safety - Part 19:Centre pivot and moving lateral types irrigation machines
JB/T 10600-2006 — Vertical self-priming pumps
JB/T 8581-2025 — Livestock machinery - Rules of type designation
JB/T 7725-2025 — Livestock machinery - Trailed scraper manure cleaner
JB/T 7138-2010 — Woven wire fencing
7 Classification and status
International classification (ICS): 65.060.99
Chinese Standard Classification (CCS): B 92
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 321-2005Preferred numbers -- Series of preferred numbers
- GB/T 5662-1985End-suction centrifugal pumps(rating 16 bar) - Designation, nominal duty point and dimensions
- GB/T 5667-2008Productive testing methods for agricultural machinery
- GB/T 13306Plates
- JB/T 5673-1991Tractors and machinery for agriculture and forestry - Painting - General technical requirements
- JB/T 8581Livestock machinery - Rules of type designation
Similar standards
How to Download JB/T 7140-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
JB/T 7140-2011
$225.00