JB/T 6771-1993Test method for thermal adaptability of spark plugs selected for automobile and motorcycle engines (English PDF)
汽车及摩托车发动机选配火花塞的热适应性试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6771-1993 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
August 21, 1993
Implementation date
October 1, 1993
Scope
JB/T 6771-1993 is the English-translated version of 汽车及摩托车发动机选配火花塞的热适应性试验方法.
JB/T 6771-1993 is a recommended Chinese mechanical and machinery industry standard that gives the test method for the thermal adaptability of spark plugs chosen for automobile and motorcycle engines.
It describes how a plug is tested to establish whether its heat range suits the engine it has been selected for. The method is written for automobile and motorcycle engines, while tests on spark plugs for special vehicles fall outside it.
It quotes JB 3743, ZB T81 001, GB 5363 and GB 7825, and it carries the Chinese classification T37. Issued on 21 August 1993, it has applied since 1 October 1993.
Found what you need?
Document preview — JB/T 6771-1993
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 6771-1993 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 21 August 1993 and has been in force since 1 October 1993.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese mechanical and machinery industry standard that gives the test method for the thermal adaptability of spark plugs chosen for automobile and motorcycle engines. It describes how a plug is tested to establish whether its heat range suits the engine it has been selected for. The method is written for automobile and motorcycle engines, while tests on spark plugs for special vehicles fall outside it. It quotes JB 3743, ZB T81 001, GB 5363 and GB 7825, and it carries the Chinese classification T37.
JB/T 6771-1993 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
JB 3743
GB 5363
GB 7825
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
JB 3743 · GB 5363 · GB 7825
Similar standards
How to Download JB/T 6771-1993
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 6771-1993
$165.00