Valid

JB/T 5916-2013Electromagnetic Pulse Valve for Bag Filters (English PDF)

袋式除尘器用电磁脉冲阀

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 5916-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 25, 2013

Implementation date

September 1, 2013

Scope

JB/T 5916-2013 is the English-translated version of 袋式除尘器用电磁脉冲阀.

JB/T 5916-2013 is the Chinese standard "Electromagnetic Pulse Valve for Bag Filters".

Its scope clause reads: This standard specifies the terminologies and definitions, classification, technical requirements, inspection methods, inspection rules as well as nameplate, packaging, storage and transportation of electromagnetic pulse valves for bag filters.

This standard is applicable to combined type magnetic pulse valve and separated type magnetic pulse valve for bag filters. Its clauses include terminologies and definitions.

Found what you need?

Document preview — JB/T 5916-2013

National Standard of the People's Republic of China

Replacing
JB/T 5916-2004

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • Foreword i
  • 1 Scope
  • 2 Normative References
  • 3 Terminologies and Definitions
  • 4 Classification
  • 4.1 Classification by Switching Element of Pulse Valve
  • 4.2 Classification by Assembly Method of Pulse Valve
  • 4.3 Classification by Input/Output Port Position of Pulse Valve
  • 4.4 Classification by Interface Form of Pulse Valve
  • 5 Technical Requirements
  • 5.1 Working Environment of Magnetic Pulse Valve
  • 5.2 Air Supply Condition
  • 5.3 Threshold Voltage
  • 5.4 Close Pressure
  • 5.5 Pressure-resistant performance
  • 5.6 Insulation Property
  • 5.7 Electromagnetic Coil Junction Box Protection Grade
  • 5.8 Electromagnetic Coil Conduction Time
  • 5.9 Anticorrosive Grade
  • 5.10 Opening Stroke of Pulse Valve
  • 5.11 Blowing Performance
  • 5.12 Service Life of Magnetic Pulse Valve
  • 5.13 Appearance
  • 6 Inspection Methods
  • 6.1 Inspection Conditions
  • 6.2 Threshold Voltage Inspection
  • 6.3 Close Pressure Inspection
  • 6.4 Pressure Resistance Inspection
  • 6.5 Insulation Inspection
  • 6.6 Electromagnetic Coil Junction Box Protection Grade Performance Inspection
  • 6.7 Inspection of Opening Stroke of Pulse Valve
  • 6.8 Temperature and Humidity Inspection
  • 6.9 Switching Characteristic Curve Inspection
  • 6.10 Inspection of Pressure Ratio for Output/Input
  • 6.11 Inspection of Rising Rate of the Outlet Pressure
  • 6.12 Inspection of Difference between Air Pulse Duration and Electric Pulse Duration
  • 6.13 Blowing Flow Inspection
  • 6.14 Switching Element Service Life Inspection
  • 7 Inspection Rules
  • 7.1 End-of-manufacturing Inspection
  • 7.2 Type Inspection
  • 8 Nameplate, Packaging, Marking, Storage and Transportation
  • 8.1 Nameplate
  • 8.2 Supply Contents
  • 8.3 Packaging and Marking
  • 8.4 Storage and Transportation

1 Scope

This standard specifies the terminologies and definitions, classification, technical requirements, inspection methods, inspection rules as well as nameplate, packaging, storage and transportation of electromagnetic pulse valves for bag filters.

This standard is applicable to combined type magnetic pulse valve and separated type magnetic pulse valve for bag filters.

2 Normative References

The following documents are indispensable for the application of this document. For dated references, only the dated edition is applicable to this document. For undated references, the latest edition (including all the amendments) applies.

GB/T 191 Packaging - Pictorial Marking for Handling of Goods

GB 4208-2008 Degrees of Protection Provided by Enclosure (IP Code)

GB/T 13277.1-2008 Compressed Air - Part 1: Contaminants and Purity Classes

JB/T 9536-1999 Environmental Technical Requirements of Corrosion Resistant Low-voltage Appliance for Indoor and Outdoor Use

3 Terminologies and Definitions

For the purpose of this document, the following terminologies and definitions apply.

3.1 Pulse valve

Valve that is controlled by such pilot valves as magnetic pulse valve or pneumatic valve and is capable of opening and closing compressed gas and generating air pulse instantly.

3.2 Magnetic pulse valve

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 5916

EditionTitleRevisionStatus
JB/T 5916-2013Electromagnetic Pulse Valve for Bag Filterscurrent editionCurrent
JB/T 5916-2004Electromagnetic Pulse Valve for Bag Filtersprevious editionSuperseded

This page sells the current edition, JB/T 5916-2013. Earlier editions are listed for reference only.

How to Download JB/T 5916-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 5916-2013

$105.00