JB/T 5823-2017Drawing dies - Diamond drawing dies - Technical requirements (English PDF)
拉制模 金刚石拉制模 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 5823-2017 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
November 7, 2017
Implementation date
April 1, 2018
Scope
JB/T 5823-2017 is the English-translated version of 拉制模 金刚石拉制模 技术条件.
JB/T 5823-2017 is a recommended Chinese machinery industry standard in the drawing die group, and it deals specifically with diamond drawing dies. It states the requirements these dies have to meet, the inspection methods used on them and the acceptance provisions.
Marking, packaging, transport and storage close the document. The Ministry of Industry and Information Technology is the issuing agency, the Chinese classification is J46 and the international classification 25.120.20.
It quotes GB/T 1184-1996, GB/T 1800.2-2009, GB/T 1801-2009, GB/T 18376.3-2015 and JB/T 3234-2012. It replaces JB/T 5823-1991.
Found what you need?
Document preview — JB/T 5823-2017
National Standard of the People's Republic of China
- ICS
- 25.120.20
- Replacing
- JB/T 3943.2-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
1 Foreword
JB/T 5823-2017 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 7 November 2017 and has been in force since 1 April 2018.
2 Scope
This standard is a recommended Chinese machinery industry standard in the drawing die group, and it deals specifically with diamond drawing dies. It states the requirements these dies have to meet, the inspection methods used on them and the acceptance provisions. Marking, packaging, transport and storage close the document. The Ministry of Industry and Information Technology is the issuing agency, the Chinese classification is J46 and the international classification 25.120.20. It quotes GB/T 1184-1996, GB/T 1800.2-2009, GB/T 1801-2009, GB/T 18376.3-2015 and JB/T 3234-2012. It replaces JB/T 5823-1991.
3 Normative references
JB/T 5823-2017 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1800.2-2009
GB/T 1801-2009
GB/T 18376.3-2015 — Grades of cemented carbide—Part 3: Grades of cemented carbide for wear parts
JB/T 3234-2012 — Superabrasives - Polycrystalline diamond die blanks for wire drawing
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Classification and status
International classification (ICS): 25.120.20
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1800.2-2009Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
- GB/T 1801-2009Geometrical product specifications (GPS) - Limits and fits - Selection of tolerance zones and fits
- GB/T 18376.3-2015Grades of cemented carbide—Part 3: Grades of cemented carbide for wear parts
- JB/T 3234-2012Superabrasive - Polycrystalline diamond die blanks for wire drawing
Similar standards
Editions of JB/T 5823
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 5823-2017 | Drawing dies - Diamond drawing dies - Technical requirements | current edition | Current |
| JB/T 3943.2-1999 | Drawing dies - Diamond drawing dies - Technical requirements | previous edition | Superseded |
This page sells the current edition, JB/T 5823-2017. Earlier editions are listed for reference only.
How to Download JB/T 5823-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1800.2-2009 — Geometrical product specifications (GPS) - Limits and fits - Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
GB/T 1801-2009 — Geometrical product specifications (GPS) - Limits and fits - Selection of tolerance zones and fits
Secure payment via Stripe
Payments accepted
JB/T 5823-2017
$135.00