Valid

JB/T 54230-1999Die engraving milling machines - Product quality grading (English PDF)

刻模铣床 产品质量分等

Preview PDF

This is a limited preview

Buy now to download the full PDF (18 pages)

Need quotation for your management?

Get a formal quotation for JB/T 54230-1999 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

June 9, 1999

Implementation date

January 1, 2000

Scope

JB/T 54230-1999 is the English-translated version of 刻模铣床 产品质量分等.

JB/T 54230-1999 is the Chinese standard "Die engraving milling machines - Product quality grading". Its scope clause reads: This standard specifies the product quality grade requirements for die-sinking milling machines.

It applies to planar die-sinking milling machines with a pantograph centre distance of 235 mm to 400 mm and to three-dimensional die-sinking milling machines with a pantograph centre distance of 350 mm to 450 mm.

Found what you need?

Document preview — JB/T 54230-1999

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Quality grades
  • Annex A Three-level accuracy grading table for die-sinking milling machines (normative)
  • Annex B Dispersion test of the working accuracy of die-sinking milling machines (normative)
1 Scope

This standard specifies the product quality grade requirements for die-sinking milling machines. It applies to planar die-sinking milling machines with a pantograph centre distance of 235 mm to 400 mm and to three-dimensional die-sinking milling machines with a pantograph centre distance of 350 mm to 450 mm.

2 Normative references

The provisions contained in the following standards become provisions of this standard through reference in this standard. The editions shown were valid at the time of publication of this standard. All standards are subject to revision, and the parties using this standard should consider the possibility of applying the latest editions of the standards listed below.

GB/T 5226.1-1996 Electrical equipment of industrial machines - Part 1: General requirements

GB/T 6576-1986 Lubrication systems for machine tools

GB/T 9061-1988 General specifications for metal-cutting machine tools

GB/T 13306-1991 Nameplates

GB/T 15375-1994 Designation of metal-cutting machine tool models

GB 15760-1995 General safety requirements for the guarding of metal-cutting machine tools

GB/T 16769-1997 Measurement of the sound pressure level of metal-cutting machine tools

JB/T 3997-1994 Specification for grey iron castings for metal-cutting machine tools

JB/T 4067.1-1996

JB/T 4067.2-1996

JB/T 4067.3-1996

JB/T 5563-1991 Metal-cutting machine tools - Inspection and assessment of conical surfaces by the colour-marking method

JB/T 8356.1-1996 Machine tool packaging - Specifications

JB/T 8356.2-1996 Machine tool packaging - Packing cases

JB/T 8356.3-1996 Machine tool packaging - Small and medium wooden cases

JB/T 8491.1-1996 Heat treatment of machine tool parts - Annealing, normalizing and quenching and tempering

JB/T 8491.2-1996 Heat treatment of machine tool parts - Quenching and tempering

JB/T 8491.3-1996 Heat treatment of machine tool parts - Induction hardening and tempering

JB/T 8491.4-1996

JB/T 8491.5-1996 Heat treatment of machine tool parts - Nitriding and carbonitriding

JB/T 9872-1999 General specifications for machined parts of metal-cutting machine tools

JB/T 9874-1999 General specifications for the assembly of metal-cutting machine tools

JB/T 9875-1999 Preparation of the technical documents accompanying metal-cutting machine tools

JB/T 9876-1999 Metal-cutting machine tools - Inspection and assessment of joint faces by the colour-marking method

JB/T 9877-1999 Determination of the cleanliness of metal-cutting machine tools

JB/T 54201-1994 General quality grading of metal-cutting machine tool products

3 Quality grades
Annex A Three-level accuracy grading table for die-sinking milling machines (normative)
Annex B Dispersion test of the working accuracy of die-sinking milling machines (normative)

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.

Similar standards

How to Download JB/T 54230-1999

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
18 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 54230-1999

$724.00