JB/T 51011-1999Internal combustion engines - Connecting rod bushings - Product quality grading (English PDF)
内燃机 连杆衬套 产品质量分等
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 51011-1999 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 30, 1999
Implementation date
June 1, 2000
Scope
JB/T 51011-1999 is the English-translated version of 内燃机 连杆衬套 产品质量分等.
JB/T 51011-1999 is the Chinese standard "Internal combustion engines - Connecting rod bushings - Product quality grading".
Its scope clause reads: This standard specifies the quality indicators, inspection methods and inspection rules for the three grades - acceptable, first grade and high grade - of connecting rod bushings for internal combustion engines.
It applies to the inspection and assessment of the product quality grade of one-piece single-layer connecting rod bushings for reciprocating internal combustion engines with a cylinder diameter up to 200 mm, hereinafter referred to as "bushings".
Found what you need?
Document preview — JB/T 51011-1999
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Quality indicators
- 4 Inspection methods
1 Scope
This standard specifies the quality indicators, inspection methods and inspection rules for the three grades - acceptable, first grade and high grade - of connecting rod bushings for internal combustion engines. It applies to the inspection and assessment of the product quality grade of one-piece single-layer connecting rod bushings for reciprocating internal combustion engines with a cylinder diameter up to 200 mm, hereinafter referred to as "bushings".
2 Normative references
The provisions contained in the following standards become provisions of this standard through reference in this standard. The editions shown were valid at the time of publication of this standard. All standards are subject to revision, and the parties using this standard should consider the possibility of applying the latest editions of the standards listed below.
GB/T 1031-1995 Surface roughness - Parameters and their values
GB/T 1184-1996 Geometrical tolerances - Tolerances for features without individual tolerance indications
GB/T 1800.3-1998 Limits and fits - Bases - Part 3: Tables of standard tolerances and fundamental deviations
GB/T 1804-1992 General tolerances - Tolerances for linear dimensions without individual tolerance indications
GB/T 1958-1980 Inspection of geometrical tolerances
GB/T 2828-1987 Sampling procedures and tables for lot-by-lot inspection by attributes (applicable to inspection of continuous lots)
JB/T 7921-1995
JB/T 7925.1-1995
3 Quality indicators
4 Inspection methods
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download JB/T 51011-1999
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 51011-1999
$365.00