Valid

JB/T 4310-1999Riveted silver-copper composite contacts - Structural types and dimension series (English PDF)

铆接式银铜复合触点 结构型式与尺寸系列

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 4310-1999 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

August 6, 1999

Implementation date

January 1, 2000

Scope

JB/T 4310-1999 is the English-translated version of 铆接式银铜复合触点 结构型式与尺寸系列.

JB/T 4310-1999 is the Chinese machinery industry standard covering riveted silver-copper composite contacts - Structural types and dimension series. It was issued on 6 August 1999 and has been in force since 1 January 2000, replacing JB 4310-1986.

The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 1999 edition.

The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 4310-1999

National Standard of the People's Republic of China

Replacing
JB 4310-1986

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 4310-1999 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 August 1999.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

JB/T 4310-1999 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

4 Related standards

Standards on related subjects:

JB/T 8987-2017 — Technical requirements for silver-copper alloy wires (strips) for commutators

GB/T 3217-2013 — Permanent magnet (magnetically hard) materials -- Methods of measurement of magnetic properties

GB/T 24270-2009 — Method of measurement of temperature coefficient of magnetic properties of permanent magnetic materials

JB/T 8633-2017 — Technical requirements for wires for rivet-type electrical contacts

JB/T 9548.10-2015 — Methods for chemical analysis of iron-chromium-aluminium alloys - Part 10: Determination of sulfur

5 Classification and status

Chinese Standard Classification (CCS): K 45

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

Editions of JB/T 4310

EditionTitleRevisionStatus
JB/T 4310-1999Riveted silver-copper composite contacts - Structural types and dimension seriescurrent editionCurrent
JB 4310-1986Riveted silver-copper composite contacts - Structural types and dimension seriesprevious editionSuperseded

This page sells the current edition, JB/T 4310-1999. Earlier editions are listed for reference only.

How to Download JB/T 4310-1999

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 4310-1999

$135.00