JB/T 20185-2017Pyrogen testers (English PDF)
热原检测仪
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 20185-2017 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 12, 2017
Implementation date
October 1, 2017
Scope
JB/T 20185-2017 is the English-translated version of 热原检测仪.
JB/T 20185-2017 is the Chinese standard "Pyrogen testers". Its scope clause reads: This standard specifies the pyrogen detector marking, requirements, test methods, inspection rules and signs, signs, packaging, transportation and storage.
This standard applies to pyrogen experiments with rabbits pyrogen test (hereinafter referred to as "detector"). Its clauses include mark; requirements.
Found what you need?
Document preview — JB/T 20185-2017
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 mark
- 4 requirements
1 Scope
This standard specifies the pyrogen detector marking, requirements, test methods, inspection rules and signs, signs, packaging, transportation and storage.
This standard applies to pyrogen experiments with rabbits pyrogen test (hereinafter referred to as "detector").
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
Mechanical and electrical safety - Mechanical electrical equipment - Part 1. General specifications
GB/T 13384 mechanical and electrical product packaging General technical conditions
GB/T 14710 medical appliances environmental requirements and test methods
Industrial machinery - Electrical equipment - Protective earthing continuity test code GB/T
3 mark
3.1 model preparation
Function code. Detection equipment
RY Type code. Pyrogen detector
Specification code. The maximum number of probes
3.2 Marking examples
Example .JRY96. Represents a pyrogen detector with up to 96 probes.
4 requirements
4.1 appearance
The appearance of the surface should be smooth, smooth, no particles off, allowing the coating surface coating should be dense, not off.
4.2 Performance
4.2.1
The detector in the range of 37.0 °C ~ 42.0 °C, the maximum allowable temperature error should be ± 0.1 °C.
4.2.2
detector in the test probe should be interchangeable.
4.2.3
pyrogen test process probe off or when the detected temperature is below 37.0 °C, the detector should alarm.
4.2.4
detector should be selected rabbit test, drug testing and testing data recording, storage, printing.
4.3 Electrical Safety
4.3.1
Protection of the continuity of the circuit shall comply with the provisions of 8.2.3 GB 5226.1-2008.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download JB/T 20185-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 20185-2017
$125.00