Valid

JB/T 20071-2005Vertical ampoule forming machines (English PDF)

立式安瓿机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 20071-2005 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

November 28, 2005

Implementation date

June 1, 2006

Scope

JB/T 20071-2005 is the English-translated version of 立式安瓿机.

JB/T 20071-2005 is the Chinese machinery industry standard covering vertical ampoule forming machines. It was issued on 28 November 2005 and has been in force since 1 June 2006, replacing YY 0233.2-1995.

The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2005 edition.

The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 20071-2005

National Standard of the People's Republic of China

Replacing: YY 0233.2-1995

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

[Preview only]
1 Scope
2 Normative references
3 Terms and definitions
3.1 Type
3.2 Basic parameters
4 Types and basic parameters
4.1 Types
4.2 Model designation
4.3 Nominal operating conditions
4.4 Safety and hygiene
4.5 Welding
4.6 Bridge (After crane operation mechanism assembled)
4.7 Assembly
4.8 Electrical control equipment
4.9 Steel pretreatment and painting
5 Technical requirements
5.1 General requirements
5.2 Safety requirements
5.3 Cold and hot working forming
5.4 Rated load test
5.5 Whole machine noise test
5.6 Static rigidity test
5.7 Dynamic load test
5.8 Crane span deviation
5.9 Diagonal difference of bridge
6 Test methods
6.1 Exit-factory inspection
6.2 Type inspection
7 Inspection rules
7.1 Marking
7.2 Packaging, transportation and storage
7.3 Transportation
7.4 Storage
8 Marking, packaging, transportation and storage
9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 20071-2005 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 28 November 2005 and has been in force since 1 June 2006.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

JB/T 20071-2005 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

4 Related standards

Standards on related subjects:

GB/T 36030-2018 — General technical requirements of CIP and SIP for pharmaceutical machinery

JB/T 20032-2012 — Series vacuum freezing dryer for pharmaceutics

JB/T 20104-2007 — Tablet hardness testers

JB/T 20188-2017 — Pharmaceutical machinery - Type designation method

JB/T 20126-2009 — Ultrasonic extraction equipment - Terms and test methods for ultrasonic performance

5 Classification and status

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

JB/T 20070-2005|JB/T 20002.2-2011|YY 0233.1-1995|YY 0233.2-1995|JB/T 14059-2022|JB/T 14190-2022

Editions of JB/T 20071

Edition	Title	Revision	Status
JB/T 20071-2005	Vertical ampoule forming machines	current edition	Current
YY 0233.2-1995	Vertical ampoule forming machines	previous edition	Superseded

This page sells the current edition, JB/T 20071-2005. Earlier editions are listed for reference only.

How to Download JB/T 20071-2005

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.