Valid

JB/T 15414-2025Automatic washing device for engineering vehicles (English PDF)

工程车辆自动清洗装置

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 15414-2025 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

Industry · Recommended

Issue date

December 17, 2025

Implementation date

July 1, 2026

Scope

JB/T 15414-2025 is the English-translated version of 工程车辆自动清洗装置.

JB/T 15414-2025 is the Chinese standard "Automatic washing device for engineering vehicles". This standard specifies the technical requirements for automatic cleaning devices for engineering vehicles, describes the corresponding test methods, and specifies inspection rules, marking, packaging, transportation, and storage.

This standard applies to the manufacture of automatic cleaning devices for engineering vehicles with a rated discharge pressure of less than 8 MPa. It was issued by Ministry of Industry and Information Technology. Issued on 2025-12-17, in force from 2026-07-01.

Found what you need?

Document preview — JB/T 15414-2025

National Standard of the People's Republic of China

Classification
J70

Issued by: Ministry of Industry and Information Technology

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Appearance and assembly
  • 4.3 Operating performance
  • 4.4 Washing channel
  • 4.5 Spray pipe pressure resistance
  • 4.6 Control system
  • 4.7 Automatic identification system
  • 4.8 Safety requirements
  • 4.9 Environmental protection requirements
  • 5 Test methods
  • 5.1 Test conditions
  • 5.2 Appearance and assembly
  • 5.3 Operating performance
  • 5.4 Washing channel
  • 5.5 Spray pipe pressure resistance
  • 5.6 Control system
  • 5.7 Automatic identification system
  • 5.8 Safety requirements
  • 5.9 Environmental protection requirements
  • 6 Inspection rules
  • 7 Marking, packaging, transportation and storage
  • 7.1 Marking
  • 7.2 Packaging
  • 7.3 Transportation
  • 7.4 Storage

1 Foreword

JB/T 15414-2025 was issued by Ministry of Industry and Information Technology on 17 December 2025 and has been in force since 1 July 2026.

This is a draft translation for reference among interesting stakeholders. The finalized translation (passing through draft translation, self-check, revision and verification) will be delivered upon being ordered.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This document defines the terms and definitions for automatic washing devices for engineering vehicles, specifies the technical requirements, describes the corresponding test methods, and specifies the inspection rules, marking, packaging, transportation and storage. This document is applicable to the manufacture of automatic washing devices for engineering vehicles with a rated discharge pressure of less than 8 MPa.

JB/T 15414-2025 is filed under Chinese Standard Classification J70, in the field of machinery.

This catalogue holds 16,018 other JB/T standards without an ICS number.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 About this standard

Sector: Mechanical & Machinery Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 15 pages (approximate)

4 Related standards

Standards on related subjects:

GB/T 13929-2024 — Water ring vacuum pumps and compressors - Testing method

JB/T 6879-2021 — Dimensional tolerances of flow passages in castings of centrifugal pumps

JB/T 13977-2020 — Liquefied natural gas (LNG) cryogenic submerged pumps

JB/T 15369-2025 — Accurate mixing equipmentforwindturbine blade

JB/T 15180-2025 — Water Jet Nozzle Performance Test Methods

JB/T 14811-2024 — Vortex nozzle for wet dust removal of converter

5 Classification and status

Chinese Standard Classification (CCS): J 70

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

How to Download JB/T 15414-2025

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 15414-2025

$150.00