Valid

JB/T 15392-2025Specification for coating of ductile iron valves (English PDF)

铸铁阀门喷塑工艺规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 15392-2025 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

Industry · Recommended

Issue date

December 17, 2025

Implementation date

July 1, 2026

Scope

JB/T 15392-2025 is the English-translated version of 铸铁阀门喷塑工艺规范.

JB/T 15392-2025 is the Chinese standard "Specification for coating of ductile iron valves".

This standard specifies the coating classification and materials for the powder coating process of cast iron valves, describes the process steps and inspection methods for powder coating of cast iron valves, and specifies the performance and quality control requirements for the coating.

This standard applies to the powder coating of thermosetting epoxy powder, fused to the inner and outer surfaces of valves in pipelines conveying non-corrosive fluids and gases at room temperature, and ductile iron.

Powder coating of cast iron pipe fittings, accessories, and pumps can be applied according to their process requirements. It was issued by Ministry of Industry and Information Technology. Issued on 2025-12-17, in force from 2026-07-01.

Found what you need?

Document preview — JB/T 15392-2025

National Standard of the People's Republic of China

ICS
25.220.20
Classification
A29

Issued by: Ministry of Industry and Information Technology

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Electroplated Inner Cutting Disc
  • 3.2 Electroplated Needle File
  • 3.3 Electroplated Grinding Head
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Performance
  • 4.3 Safety and protection
  • 4.4 Castings, forgings and weldments
  • 4.5 Machining
  • 4.6 No-load operation requirements
  • 4.7 Load operation requirements
  • 4.8 Motion accuracy
  • 5 Test methods
  • 5.1 Appearance
  • 5.2 Protection requirements
  • 5.3 Machining and assembly quality of components
  • 5.4 Appearance quality
  • 5.5 Installation requirements for fire extinguishers
  • 5.6 Functional test requirements
  • 5.7 Anti-interference capability and functional stability test requirements
  • 5.8 Mass per unit area
  • 5.9 Tensile breaking force
  • 6 Inspection rules
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 6.3 Joint surfaces
  • 6.4 Numerical control system
  • 6.5 Working fluid system
  • 6.6 Lubrication system
  • 6.7 Machine running test
  • 6.8 Accuracy inspection
  • 6.9 Others
  • 7 Marking, packaging, transportation and storage
  • 7.2 Machining and assembly of components
  • 7.9 Load operation test
  • 8.1 General
  • 8.2 Inspection principles
  • 8.3 Inspection items
  • 8.4 Conformity judgment
  • 8.5 Storage
  • 9.1 Marking
  • 9.2 Packaging
  • 9.3 Transportation

1 Foreword

JB/T 15392-2025 was issued by Ministry of Industry and Information Technology on 17 December 2025 and has been in force since 1 July 2026.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard specifies the coating classification and materials for the powder coating process of cast iron valves, describes the process steps and inspection methods for powder coating of cast iron valves, and specifies the performance and quality control requirements for the coating. This standard applies to the powder coating of thermosetting epoxy powder, fused to the inner and outer surfaces of valves in pipelines conveying non-corrosive fluids and gases at room temperature, and ductile iron. Powder coating of cast iron pipe fittings, accessories, and pumps can be applied according to their process requirements.

JB/T 15392-2025 falls under ICS 25.220.20, in the field of manufacturing engineering.

This catalogue holds 1,459 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 About this standard

Sector: Mechanical & Machinery Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 15 pages (approximate)

4 Related standards

Standards on related subjects:

GB/T 13912-2020 — Metallic coatings--Hot dip galvanized coatings on fabricated iron and steel articles--Specifications and test methods

JB/T 12855-2016 — Metallic coatings - Electroplated coatings of zinc-nickel alloys

GB/T 15519-2002 — Chemical conversion coatings -- Black oxide coating on iron and steel -- Specification and test methods

JB/T 15391-2025 — Specification for zirconia conversion solutions on metal surfaces

JB/T 12857-2016 — Process specification for hexavalent chromium-free decorative electroplating

JB/T 12858-2016 — Process specification for cyanide-free zinc and zinc alloy electroplating

5 Classification and status

International classification (ICS): 25.220.20

Chinese Standard Classification (CCS): A 29

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

How to Download JB/T 15392-2025

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 15392-2025

$150.00