JB/T 15388-2025CO2 refrigerant check valve for new energy vehicle air conditioning (English PDF)
新能源汽车空调用二氧化碳制冷剂单向阀
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 15388-2025 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
Industry · Recommended
Issue date
December 17, 2025
Implementation date
July 1, 2026
Scope
JB/T 15388-2025 is the English-translated version of 新能源汽车空调用二氧化碳制冷剂单向阀.
JB/T 15388-2025 is the Chinese standard "CO2 refrigerant check valve for new energy vehicle air conditioning".
This standard specifies the type, basic parameters, and technical requirements of carbon dioxide refrigerant check valves for air conditioning in new energy vehicles, describes the corresponding test methods, and specifies inspection rules, marking, packaging, transportation, and storage.
This standard applies to the manufacture of check valves using R744 (carbon dioxide) as refrigerant and with a valve diameter not exceeding 10 mm. It was issued by Ministry of Industry and Information Technology. Issued on 2025-12-17, in force from 2026-07-01.
Found what you need?
Document preview — JB/T 15388-2025
National Standard of the People's Republic of China
- Classification
- J73
Issued by: Ministry of Industry and Information Technology
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Basic parameters
- 4.1 Operating conditions
- 4.2 Basic parameters
- 4.2.1 Nominal size (DN)
- 4.2.2 Rated flow coefficient (K
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Dimensional requirements
- 5.3 Materials
- 5.4 Appearance
- 5.5 Performance requirements
- 5.5.1 Leak tightness
- 5.5.2 Flow capacity
- 5.5.3 Internal leakage rate
- 5.5.4 Pressure strength
- 5.5.5 Minimum action pressure differential
- 5.5.6 High temperature resistance
- 5.5.7 Low temperature resistance
- 5.5.8 Corrosion resistance
- 5.5.9 Durability
- 6 Test methods
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
1 Foreword
JB/T 15388-2025 was issued by Ministry of Industry and Information Technology on 17 December 2025 and has been in force since 1 July 2026.
This is a draft translation for reference among interesting stakeholders. The finalized translation (passing through draft translation, self-check, revision and verification) will be delivered upon being ordered.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This document specifies the types, basic parameters and technical requirements for carbon dioxide refrigerant check valves for new energy vehicle air conditioning, describes the corresponding test methods, and specifies the inspection rules, marking, packaging, transportation and storage. This document is applicable to the manufacture of check valves with R744 (carbon dioxide) as the refrigerant and valve sizes not exceeding 10 mm. Note: The check valves covered by this document are used in the manufacture of air conditioning heat pump systems for new energy vehicles.
JB/T 15388-2025 is filed under Chinese Standard Classification J73, in the field of machinery.
This catalogue holds 16,018 other JB/T standards without an ICS number.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 About this standard
Sector: Mechanical & Machinery Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
JB/T 12843-2016 — Centrifugal refrigerant compressors
GB/T 17758-2010 — Unitary air conditioners
GB/T 18362-2008 — Direct-fired lithium bromide absorption water chiller (heater)
JB/T 15385-2025 — Thermo-siphon evaporator for air conditioning and refrigeration equipment
JB/T 15384-2025 — Reservoir for thermo-siphon oil cooling system for air conditioning and refrigeration
JB/T 15383-2025 — Magnetic bearing centrifugal refrigerant compressors
5 Classification and status
Chinese Standard Classification (CCS): J 73
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download JB/T 15388-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 15388-2025
$210.00