JB/T 15387-2025Scroll single-machine double-stage refrigerant compressor (English PDF)
涡旋式单机双级制冷剂压缩机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 15387-2025 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
Industry · Recommended
Issue date
December 17, 2025
Implementation date
July 1, 2026
Scope
JB/T 15387-2025 is the English-translated version of 涡旋式单机双级制冷剂压缩机.
JB/T 15387-2025 is the Chinese standard "Scroll single-machine double-stage refrigerant compressor".
This standard specifies the type, basic parameters, and technical requirements of scroll-type single-unit two-stage refrigerant compressors, describes the corresponding test methods, and specifies inspection rules, marking, packaging, transportation, and storage.
This standard applies to the manufacture of scroll-type single-unit two-stage refrigerant compressors. This standard does not apply to compressors using R744 refrigerant.
It was issued by Ministry of Industry and Information Technology. Issued on 2025-12-17, in force from 2026-07-01.
Found what you need?
Document preview — JB/T 15387-2025
National Standard of the People's Republic of China
- Classification
- J73
Issued by: Ministry of Industry and Information Technology
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Design and operating conditions
- 4.3 Nominal operating conditions
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Performance requirements
- 5.3.1 Air tightness
- 5.3.2 Volumetric flow rate
- 5.3.3 Refrigerating (heating) capacity, input power and coefficient of performance
- 5.3.4 Internal impurity content
- 5.3.5 Residual moisture content
- 5.3.6 Noise
- 5.3.7 Vibration
- 5.3.8 Starting performance
- 6 Test methods
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
1 Foreword
JB/T 15387-2025 was issued by Ministry of Industry and Information Technology on 17 December 2025 and has been in force since 1 July 2026.
This is a draft translation for reference among interesting stakeholders. The finalized translation (passing through draft translation, self-check, revision and verification) will be delivered upon being ordered.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This document specifies the types, basic parameters and technical requirements for scroll single-machine two-stage refrigerant compressors, describes the corresponding test methods, and specifies the inspection rules, marking, packaging, transportation and storage. This document is applicable to the manufacture of scroll single-machine two-stage refrigerant compressors. This document is not applicable to compressors using R744 as the refrigerant.
JB/T 15387-2025 is filed under Chinese Standard Classification J73, in the field of machinery.
This catalogue holds 16,018 other JB/T standards without an ICS number.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 About this standard
Sector: Mechanical & Machinery Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
JB/T 12843-2016 — Centrifugal refrigerant compressors
GB/T 17758-2010 — Unitary air conditioners
GB/T 18362-2008 — Direct-fired lithium bromide absorption water chiller (heater)
JB/T 15385-2025 — Thermo-siphon evaporator for air conditioning and refrigeration equipment
JB/T 15384-2025 — Reservoir for thermo-siphon oil cooling system for air conditioning and refrigeration
JB/T 15383-2025 — Magnetic bearing centrifugal refrigerant compressors
5 Classification and status
Chinese Standard Classification (CCS): J 73
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download JB/T 15387-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 15387-2025
$315.00