JB/T 15376-2025Candy folding packaging machine (English PDF)
折叠式糖果包装机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 15376-2025 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
Industry · Recommended
Issue date
December 17, 2025
Implementation date
July 1, 2026
Scope
JB/T 15376-2025 is the English-translated version of 折叠式糖果包装机.
JB/T 15376-2025 is the Chinese standard "Candy folding packaging machine". This standard specifies the model, basic parameters, working conditions, and technical requirements of folding candy packaging machines.
It describes the corresponding test methods and specifies inspection rules, labeling, packaging, transportation, and storage requirements. This standard applies to the manufacture of folding candy packaging machines.
It was issued by Ministry of Industry and Information Technology. Issued on 2025-12-17, in force from 2026-07-01.
Found what you need?
Document preview — JB/T 15376-2025
National Standard of the People's Republic of China
- Classification
- J83
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 15376-2025 was issued by Ministry of Industry and Information Technology on 17 December 2025 and has been in force since 1 July 2026.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the model, basic parameters, working conditions, and technical requirements of folding candy packaging machines. It describes the corresponding test methods and specifies inspection rules, labeling, packaging, transportation, and storage requirements. This standard applies to the manufacture of folding candy packaging machines.
JB/T 15376-2025 is filed under Chinese Standard Classification J83, in the field of machinery.
This catalogue holds 16,018 other JB/T standards without an ICS number.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 About this standard
Sector: Mechanical & Machinery Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
GB/T 18849-2023 — Powered industrial trucks - Brake performance and component strength
GB/T 10827.3-2022 — Industrial trucks - Safety requirements and verification - Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads
JB/T 11988-2014 — Internal combustion counterbalanced forklift trucks - Energy efficiency test methods
JB/T 15372-2025 — Wet sheet jelly (vermicelli) packaging machine
JB/T 15371-2025 — Aluminum plastic composite film forming and vacuum packaging machine
JB/T 15370-2025 — Paper cup (bowl) assembly bagging machine
5 Classification and status
Chinese Standard Classification (CCS): J 83
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download JB/T 15376-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 15376-2025
$165.00