JB/T 15351-2025Powder metallurgy shift gears for automotive - Specification (English PDF)
汽车变速器用粉末冶金换挡齿轮 技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 15351-2025 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
Industry · Recommended
Issue date
December 17, 2025
Implementation date
July 1, 2026
Scope
JB/T 15351-2025 is the English-translated version of 汽车变速器用粉末冶金换挡齿轮 技术规范.
JB/T 15351-2025 is the Chinese standard "Powder metallurgy shift gears for automotive - Specification".
This standard specifies the structure and technical requirements for powder metallurgy shift gears used in automotive transmissions, describes the corresponding test methods, and specifies inspection rules, marking, packaging, transportation, and storage.
This standard applies to the manufacture of automotive transmission shift gears produced in batches using powder metallurgy processes; the manufacture of other similar powder metallurgy gears should refer to this standard.
It was issued by Ministry of Industry and Information Technology. Issued on 2025-12-17, in force from 2026-07-01.
Found what you need?
Document preview — JB/T 15351-2025
National Standard of the People's Republic of China
- ICS
- 77.160
- Classification
- H72
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 2.1 Terms
- 3 Terms and definitions
- 4 Structure
- 5 Technical requirements
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 15351-2025 was issued by Ministry of Industry and Information Technology on 17 December 2025 and has been in force since 1 July 2026.
This is a draft translation for reference among interesting stakeholders. The finalized translation (passing through draft translation, self-check, revision and verification) will be delivered upon being ordered.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This document specifies the structure and technical requirements for powder metallurgy shift gears for automotive transmissions, describes the corresponding test methods, and specifies the inspection rules, marking, packaging, transportation and storage. This document is applicable to the manufacture of automotive transmission shift gears produced in batches by powder metallurgy processes. The manufacture of other similar powder metallurgy gears shall refer to this document.
JB/T 15351-2025 falls under ICS 77.160, in the field of metallurgy.
This catalogue holds 222 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 About this standard
Sector: Mechanical & Machinery Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
JB/T 10766-2022 — Copper-based dry friction discs for clutches of forging machine tools - Technical specifications
GB/T 11101-2020 — Cemented carbide blanks for round rods
GB/T 14199-2010 — Electroacoustics - General specification for hearing aid
JB/T 15353-2025 — Specification for sintered aluminum alloy structural parts
JB/T 15352-2025 — Powder metallurgy surface densified sprocket for automotive engine - Specification
JB/T 15350-2025 — Specifications for sintered drive sleeve for electronic vacuum pump of automotive brake system
5 Classification and status
International classification (ICS): 77.160
Chinese Standard Classification (CCS): H 72
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download JB/T 15351-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 15351-2025
$105.00