JB/T 15339-2025Double blister packaging machine (English PDF)
双面泡壳吸塑包装机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 15339-2025 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
Industry · Recommended
Issue date
December 17, 2025
Implementation date
July 1, 2026
Scope
JB/T 15339-2025 is the English-translated version of 双面泡壳吸塑包装机.
JB/T 15339-2025 is the Chinese standard "Double blister packaging machine". This standard specifies the model, type, basic parameters, working conditions and technical requirements of double-sided blister packaging machines.
It describes the corresponding test methods and specifies the requirements for inspection rules, labeling, packaging, transportation and storage. This standard applies to the manufacture of double-sided blister packaging machines.
It was issued by Ministry of Industry and Information Technology. Issued on 2025-12-17, in force from 2026-07-01.
Found what you need?
Document preview — JB/T 15339-2025
National Standard of the People's Republic of China
- Classification
- J83
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 15339-2025 was issued by Ministry of Industry and Information Technology on 17 December 2025 and has been in force since 1 July 2026.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the model, type, basic parameters, working conditions and technical requirements of double-sided blister packaging machines. It describes the corresponding test methods and specifies the requirements for inspection rules, labeling, packaging, transportation and storage. This standard applies to the manufacture of double-sided blister packaging machines.
JB/T 15339-2025 is filed under Chinese Standard Classification J83, in the field of machinery.
This catalogue holds 16,018 other JB/T standards without an ICS number.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 About this standard
Sector: Mechanical & Machinery Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
GB/T 18849-2023 — Powered industrial trucks - Brake performance and component strength
GB/T 10827.3-2022 — Industrial trucks - Safety requirements and verification - Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads
JB/T 11988-2014 — Internal combustion counterbalanced forklift trucks - Energy efficiency test methods
JB/T 15331-2025 — Automatic forming machine for lid and base rigid boxes
JB/T 15330-2025 — Adult diapers producing and packaging line
JB/T 15329-2025 — Pulp molding machine
5 Classification and status
Chinese Standard Classification (CCS): J 83
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download JB/T 15339-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 15339-2025
$270.00