Valid

JB/T 15329-2025Pulp molding machine (English PDF)

植物纤维(纸浆)模塑制品成型机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 15329-2025 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

Industry · Recommended

Issue date

December 17, 2025

Implementation date

July 1, 2026

Scope

JB/T 15329-2025 is the English-translated version of 植物纤维(纸浆)模塑制品成型机.

JB/T 15329-2025 is the Chinese standard "Pulp molding machine". This standard specifies the model, type, basic parameters, operating conditions, and technical requirements of molding machines for plant fiber (pulp) molded products.

It describes the corresponding test methods and specifies inspection rules, labeling, packaging, transportation, and storage. This standard applies to the manufacture of molding machines for plant fiber (pulp) molded products using in-mold drying.

It was issued by Ministry of Industry and Information Technology. Issued on 2025-12-17, in force from 2026-07-01.

Found what you need?

Document preview — JB/T 15329-2025

National Standard of the People's Republic of China

Classification
J83

Issued by: Ministry of Industry and Information Technology

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 15329-2025 was issued by Ministry of Industry and Information Technology on 17 December 2025 and has been in force since 1 July 2026.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard specifies the model, type, basic parameters, operating conditions, and technical requirements of molding machines for plant fiber (pulp) molded products. It describes the corresponding test methods and specifies inspection rules, labeling, packaging, transportation, and storage. This standard applies to the manufacture of molding machines for plant fiber (pulp) molded products using in-mold drying.

JB/T 15329-2025 is filed under Chinese Standard Classification J83, in the field of machinery.

This catalogue holds 16,018 other JB/T standards without an ICS number.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 About this standard

Sector: Mechanical & Machinery Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 15 pages (approximate)

4 Related standards

Standards on related subjects:

GB/T 18849-2023 — Powered industrial trucks - Brake performance and component strength

GB/T 10827.3-2022 — Industrial trucks - Safety requirements and verification - Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads

JB/T 11988-2014 — Internal combustion counterbalanced forklift trucks - Energy efficiency test methods

JB/T 15327-2025 — Laser printer

JB/T 15326-2025 — Multi-layer corrugated cardboard production line

JB/T 15325-2025 — Automatic pump capping machine

5 Classification and status

Chinese Standard Classification (CCS): J 83

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

How to Download JB/T 15329-2025

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 15329-2025

$195.00