JB/T 15324-2025Feed machinery - Cantilever-type unloading machine (English PDF)
饲料机械 悬臂式出仓机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 15324-2025 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
Industry · Recommended
Issue date
December 17, 2025
Implementation date
July 1, 2026
Scope
JB/T 15324-2025 is the English-translated version of 饲料机械 悬臂式出仓机.
JB/T 15324-2025 is the Chinese standard "Feed machinery - Cantilever-type unloading machine".
This standard specifies the types, basic parameters, and technical requirements of cantilever feed silo discharge machines, describes the corresponding test methods, and specifies inspection rules, marking, packaging, transportation, and storage requirements.
This standard applies to the manufacture of cantilever feed silo discharge machines used for forced discharge of powdery or granular materials with poor self-flowability, prone to caking, or prone to arching from medium and small-sized flat-bottomed cylindrical silos.
It was issued by Ministry of Industry and Information Technology. Issued on 2025-12-17, in force from 2026-07-01.
Found what you need?
Document preview — JB/T 15324-2025
National Standard of the People's Republic of China
- ICS
- 65.060
- Classification
- B93
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 15324-2025 was issued by Ministry of Industry and Information Technology on 17 December 2025 and has been in force since 1 July 2026.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the types, basic parameters, and technical requirements of cantilever feed silo discharge machines, describes the corresponding test methods, and specifies inspection rules, marking, packaging, transportation, and storage requirements. This standard applies to the manufacture of cantilever feed silo discharge machines used for forced discharge of powdery or granular materials with poor self-flowability, prone to caking, or prone to arching from medium and small-sized flat-bottomed cylindrical silos.
JB/T 15324-2025 falls under ICS 65.060, in the field of agriculture.
This catalogue holds 368 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 About this standard
Sector: Mechanical & Machinery Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
GB/T 12785-2014 — Test methods for submersible motor-pumps
GB 16151.12-2008 — Technical requirements for the operating safety of agricultural machinery - Part 12: Grain combine harvesters
JB/T 10600-2006 — Vertical self-priming pumps
JB/T 11255-2026 — Feed machinery - Roto-shaker grader
JB/T 15323-2025 — Single screw feed expander
JB/T 15322-2025 — Pellet extruder for aquatic fry feed
5 Classification and status
International classification (ICS): 65.060
Chinese Standard Classification (CCS): B 93
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download JB/T 15324-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 15324-2025
$270.00