JB/T 15310-2025Aluminum alloy melting furnace (English PDF)
铝合金熔炼炉
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 15310-2025 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
Industry · Recommended
Issue date
December 17, 2025
Implementation date
July 1, 2026
Scope
JB/T 15310-2025 is the English-translated version of 铝合金熔炼炉.
JB/T 15310-2025 is the Chinese standard "Aluminum alloy melting furnace". This standard specifies the structural type, basic parameters, and technical requirements of aluminum alloy melting furnaces.
It describes the corresponding test methods and specifies inspection rules, instruction manuals, marking, packaging, transportation, and storage. This standard applies to the manufacture of gas-fired aluminum alloy melting furnaces (also known as aluminum alloy flame melting furnaces or aluminum alloy continuous melting furnaces).
This standard does not apply to electrically heated aluminum alloy melting furnaces or machine-side heat preservation furnaces. It was issued by Ministry of Industry and Information Technology. Issued on 2025-12-17, in force from 2026-07-01.
Found what you need?
Document preview — JB/T 15310-2025
National Standard of the People's Republic of China
- ICS
- 25.120.30
- Classification
- J61
Issued by: Ministry of Industry and Information Technology
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Structural types
- 4.1 Classification of structural types
- 4.2 Structural schematics
- 5 Basic parameters
- 6 Technical requirements
- 6.1 General requirements
- 6.2 Manufacturing requirements
- 6.3 Furnace shell requirements
- 6.4 Lining requirements
- 6.5 Furnace chamber requirements
- 6.6 Mechanical mechanism requirements
- 6.7 Flue gas collection and discharge mechanism requirements
- 6.8 Aluminium liquid discharge mechanism requirements
- 6.9 Operation and maintenance platform requirements
- 6.10 Combustion system requirements
- 6.11 Control system requirements
- 6.12 Safety requirements
- 6.13 No-load operation requirements
- 6.14 Load operation requirements
- 7 Test methods
- 7.1 General performance test
- 7.2 Melting rate test
- 7.3 Burnout rate test
- 7.4 Specific energy consumption test
- 8 Inspection rules
- 8.1 Factory inspection
- 8.2 Type test
- 9 Instruction manual
1 Foreword
JB/T 15310-2025 was issued by Ministry of Industry and Information Technology on 17 December 2025 and has been in force since 1 July 2026.
This is a draft translation for reference among interesting stakeholders. The finalized translation (passing through draft translation, self-check, revision and verification) will be delivered upon being ordered.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard specifies the structural type, basic parameters, and technical requirements of aluminum alloy melting furnaces. It describes the corresponding test methods and specifies inspection rules, instruction manuals, marking, packaging, transportation, and storage. This standard applies to the manufacture of gas-fired aluminum alloy melting furnaces (also known as aluminum alloy flame melting furnaces or aluminum alloy continuous melting furnaces). This standard does not apply to electrically heated aluminum alloy melting furnaces or machine-side heat preservation furnaces.
JB/T 15310-2025 falls under ICS 25.120.30, in the field of manufacturing engineering.
This catalogue holds 1,459 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 About this standard
Sector: Mechanical & Machinery Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
GB/T 37365-2019 — Die casting unit—Performance testing method
JB/T 13248-2018 — Energy efficiency grades and evaluation methods for die casting machines
GB/T 21269-2018 — Cold chamber die casting machines
JB/T 15309-2025 — Squeeze-casting unit
JB/T 15307-2025 — Trolley car type shot blasting machine
5 Classification and status
International classification (ICS): 25.120.30
Chinese Standard Classification (CCS): J 61
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download JB/T 15310-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 15310-2025
$420.00