JB/T 15300-2025Plain bearings - Shear test methods for bond strength of bronze-steel backed bimetallic plates with alloy layer thickness 0.5mm ~ 2.0mm (English PDF)
滑动轴承 合金层厚度0.5mm~2.0mm的青铜-钢背双金属板材结合强度的剪切试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 15300-2025 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
Industry · Recommended
Issue date
December 17, 2025
Implementation date
July 1, 2026
Scope
JB/T 15300-2025 is the English-translated version of 滑动轴承 合金层厚度0.5mm~2.0mm的青铜-钢背双金属板材结合强度的剪切试验方法.
JB/T 15300-2025 is the Chinese standard "Plain bearings - Shear test methods for bond strength of bronze-steel backed bimetallic plates with alloy layer thickness 0.5mm ~ 2.0mm".
This standard specifies the shear test method for the bond strength of bronze-steel backed bimetallic plates with an alloy layer thickness of 0.5mm to 2.0mm, and specifies the test report.
This standard applies to the testing of the bond strength between the alloy layer and the steel backing in bronze-steel backed bimetallic plates with an alloy layer thickness of 0.5mm to 2.0mm.
It was issued by Ministry of Industry and Information Technology. Issued on 2025-12-17, in force from 2026-07-01.
Found what you need?
Document preview — JB/T 15300-2025
National Standard of the People's Republic of China
- ICS
- 21.100.10
- Classification
- J12
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 4 Technical Requirements
- 4.1 Pallet
- 4.2 Pallet Package
- 5 Measurement and Evaluation Method
- 5.1 Paper Box and Calp Box
- 5.2 Wooden Box
- 6.1 Materials
- 6.2 Dimension and Tolerance
- 6.3 Box Making
- 6.4 Packing
- 6.5 Marks
- 7 Test Method
- 7.1 Material Test
- 7.2 Measurement of Dimensional Tolerance
- 7.3 Appearance Inspection
- 7.4 Property Test
- 8 Inspection rules
- 9 Marking, packaging, transportation and storage
1 Foreword
JB/T 15300-2025 was issued by Ministry of Industry and Information Technology on 17 December 2025 and has been in force since 1 July 2026.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the shear test method for the bond strength of bronze-steel backed bimetallic plates with an alloy layer thickness of 0.5mm to 2.0mm, and specifies the test report. This standard applies to the testing of the bond strength between the alloy layer and the steel backing in bronze-steel backed bimetallic plates with an alloy layer thickness of 0.5mm to 2.0mm.
JB/T 15300-2025 falls under ICS 21.100.10, in the field of mechanical systems and components.
This catalogue holds 260 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 About this standard
Sector: Mechanical & Machinery Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
GB/T 18329.1-2023 — Plain bearings - Metallic multilayer plain bearings - Part 1: Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0.5 mm
GB/T 2889.6-2020 — Plain bearings - Terms, definitions, classification and symbols - Part 6: Abbreviated terms
GB/T 27553.1-2011 — Specification for plastics-bronze-steel backing triple-layer self-lubricating materials - Part 1: Plastic overlay with modified PTFE
JB/T 14786-2024 — Sliding bearings - Technical specifications for copper alloy-steel back self-lubricating bearing materials
JB/T 14859-2024 — Sliding bearings - Steel back cast copper alloy inlaid solid lubricant bearings
JB/T 14858-2024 — Sliding bearings - Long fiber wound self-lubricating bearings
5 Classification and status
International classification (ICS): 21.100.10
Chinese Standard Classification (CCS): J 12
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download JB/T 15300-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 15300-2025
$135.00