JB/T 15242-2025Single-rope winding mine hoist with built-in permanent-magnet motor (English PDF)
永磁电机内装单绳缠绕式矿井提升机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 15242-2025 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
Industry · Recommended
Issue date
July 2, 2025
Implementation date
February 1, 2026
Scope
JB/T 15242-2025 is the English-translated version of 永磁电机内装单绳缠绕式矿井提升机.
JB/T 15242-2025 is the Chinese standard "Single-rope winding mine hoist with built-in permanent-magnet motor". This standard specifies the type, basic parameters, and technical requirements of a permanent magnet motor-driven single-rope wound mine hoist.
It describes the corresponding test methods and specifies inspection rules, marking, packaging, transportation, and storage.
This standard applies to the manufacture of permanent magnet motor-driven single-rope wound mine hoists used for hoisting materials or personnel in vertical or inclined shafts of coal mines (non-explosion-proof), metal mines, and non-metal mines.
It was issued by Ministry of Industry and Information Technology. Issued on 2025-07-02, in force from 2026-02-01.
Found what you need?
Document preview — JB/T 15242-2025
National Standard of the People's Republic of China
- ICS
- 73.100.40
- Classification
- D93
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 15242-2025 was issued by Ministry of Industry and Information Technology on 2 July 2025 and has been in force since 1 February 2026.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the type, basic parameters, and technical requirements of a permanent magnet motor-driven single-rope wound mine hoist. It describes the corresponding test methods and specifies inspection rules, marking, packaging, transportation, and storage. This standard applies to the manufacture of permanent magnet motor-driven single-rope wound mine hoists used for hoisting materials or personnel in vertical or inclined shafts of coal mines (non-explosion-proof), metal mines, and non-metal mines.
JB/T 15242-2025 falls under ICS 73.100.40, in the field of mining and minerals.
This catalogue holds 265 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 About this standard
Sector: Mechanical & Machinery Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
JB/T 14329-2021 — Ring-roller micro powder mills
JB/T 9023.1-2019 — Down-the-hole drill rigs - Part 1: Open-pit mining type
MT/T 716-2019 — Technical delivery requirements of steel wire ropes for coal mine hoisting
JB/T 14596-2025 — Guide trough for mining belt conveyor
JB/T 14594-2025 — Underground mining blasting equipment transport vehicle
JB/T 15241-2025 — Mining cast stone scraper conveyor
5 Classification and status
International classification (ICS): 73.100.40
Chinese Standard Classification (CCS): D 93
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download JB/T 15242-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 15242-2025
$210.00