Valid

JB/T 15240-2025Corona-resistant enameled copper round wire for oil-cooled motor (English PDF)

油冷型电机用耐电晕漆包铜圆线

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 15240-2025 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

Industry · Recommended

Issue date

July 2, 2025

Implementation date

February 1, 2026

Scope

JB/T 15240-2025 is the English-translated version of 油冷型电机用耐电晕漆包铜圆线.

JB/T 15240-2025 is the Chinese standard "Corona-resistant enameled copper round wire for oil-cooled motor".

This standard specifies the model naming and technical requirements for corona-resistant enameled copper round wire for oil-cooled motors, describes the corresponding test methods, and specifies inspection rules, marking, packaging, transportation, and storage requirements.

This standard applies to the manufacturing of corona-resistant enameled copper round wire for oil-cooled motors of grade 200 polyamide-imide composite polyester or polyesterimide and grade 220 polyamide-imide.

It was issued by Ministry of Industry and Information Technology. Issued on 2025-07-02, in force from 2026-02-01.

Found what you need?

Document preview — JB/T 15240-2025

National Standard of the People's Republic of China

ICS
29.060.10
Classification
K12

Issued by: Ministry of Industry and Information Technology

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 15240-2025 was issued by Ministry of Industry and Information Technology on 2 July 2025 and has been in force since 1 February 2026.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard specifies the model naming and technical requirements for corona-resistant enameled copper round wire for oil-cooled motors, describes the corresponding test methods, and specifies inspection rules, marking, packaging, transportation, and storage requirements. This standard applies to the manufacturing of corona-resistant enameled copper round wire for oil-cooled motors of grade 200 polyamide-imide composite polyester or polyesterimide and grade 220 polyamide-imide.

JB/T 15240-2025 falls under ICS 29.060.10, in the field of electrical engineering.

This catalogue holds 619 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 About this standard

Sector: Mechanical & Machinery Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 15 pages (approximate)

4 Related standards

Standards on related subjects:

GB/T 6109.5-2008 — Enamelled round winding wire - Part 5: Polyesterimide enamelled round copper wire, class 180

GB/T 7095.1-2008 — Enamelled rectangular copper winding wires -- Part 1: General requirements

JB/T 6758.4-2007 — Continuously transposed conductors - Part 4: Heat resistant continuously transposed conductors of enamelled copper wires

JB/T 4014.2-2013 — Winding wires for submersible motors - Part 2: Polyethylene insulated and nylon sheathed winding wires with rated voltages up to and including 450/750V

JB/T 4014.1-2013 — Winding wires for submersible motors - Part 1: General requirements

JB/T 10930-2010 — Class 200 corona-resistant enamelled round copper wires

5 Classification and status

International classification (ICS): 29.060.10

Chinese Standard Classification (CCS): K 12

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

How to Download JB/T 15240-2025

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 15240-2025

$240.00