Valid

JB/T 15206.1-2025CNC double-end cutting lathes - Part 1: Testing of the accuracy (English PDF)

数控双头车床 第1部分:精度检验

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 15206.1-2025 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

Industry · Recommended

Issue date

December 17, 2025

Implementation date

July 1, 2026

Scope

JB/T 15206.1-2025 is the English-translated version of 数控双头车床 第1部分:精度检验.

JB/T 15206.1-2025 is the Chinese standard "CNC double-end cutting lathes - Part 1: Testing of the accuracy".

This standard specifies the requirements for the structural type, coordinate naming, geometric accuracy, positioning accuracy, repeatability, and working accuracy of CNC double-headed lathes, describes the corresponding testing methods, and specifies the inspection items.

This standard applies to the accuracy of CNC double-headed lathes with a workpiece diameter of 3mm to 200mm and a workpiece length of 50mm to 2000mm, and is suitable for ordinary accuracy grade inspection activities.

It was issued by Ministry of Industry and Information Technology. Issued on 2025-12-17, in force from 2026-07-01.

Found what you need?

Document preview — JB/T 15206.1-2025

National Standard of the People's Republic of China

ICS
25.040.20
Classification
J53

Issued by: Ministry of Industry and Information Technology

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Electroplated Inner Cutting Disc
  • 3.2 Electroplated Needle File
  • 3.3 Electroplated Grinding Head
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Performance
  • 4.3 Safety and protection
  • 4.4 Castings, forgings and weldments
  • 4.5 Machining
  • 4.6 No-load operation requirements
  • 4.7 Load operation requirements
  • 4.8 Motion accuracy
  • 5 Test methods
  • 5.1 Appearance
  • 5.2 Protection requirements
  • 5.3 Machining and assembly quality of components
  • 5.4 Appearance quality
  • 5.5 Installation requirements for fire extinguishers
  • 5.6 Functional test requirements
  • 5.7 Anti-interference capability and functional stability test requirements
  • 5.8 Mass per unit area
  • 5.9 Tensile breaking force
  • 6 Inspection rules
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 6.3 Joint surfaces
  • 6.4 Numerical control system
  • 6.5 Working fluid system
  • 6.6 Lubrication system
  • 6.7 Machine running test
  • 6.8 Accuracy inspection
  • 6.9 Others
  • 7 Marking, packaging, transportation and storage
  • 7.2 Machining and assembly of components
  • 7.9 Load operation test
  • 8.1 General
  • 8.2 Inspection principles
  • 8.3 Inspection items
  • 8.4 Conformity judgment
  • 8.5 Storage
  • 9.1 Marking
  • 9.2 Packaging
  • 9.3 Transportation

1 Foreword

JB/T 15206.1-2025 was issued by Ministry of Industry and Information Technology on 17 December 2025 and has been in force since 1 July 2026.

It is one of 2 parts of the JB/T 15206 series.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard specifies the requirements for the structural type, coordinate naming, geometric accuracy, positioning accuracy, repeatability, and working accuracy of CNC double-headed lathes, describes the corresponding testing methods, and specifies the inspection items. This standard applies to the accuracy of CNC double-headed lathes with a workpiece diameter of 3mm to 200mm and a workpiece length of 50mm to 2000mm, and is suitable for ordinary accuracy grade inspection activities.

JB/T 15206.1-2025 falls under ICS 25.040.20, in the field of manufacturing engineering.

This catalogue holds 1,459 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 About this standard

Sector: Mechanical & Machinery Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 15 pages (approximate)

4 Related standards

Other parts of this standard:

JB/T 15206.2-2025 — Part 2: Specification

Standards on related subjects:

JB/T 12396-2015 — Proportional valve solenoids

GB/T 4346-2008 — Machine tools - Manually operated self-centring chucks

JB/T 8490-2008 — Floor-type boring machines and floor-type milling and boring machines - Technical requirements

JB/T 15191-2025 — CNC vertical turning and milling machines with two columns and movable tableTesting of the accuracy

JB/T 15190-2025 — Testing of the accuracy CNC vertical turning and milling machines with two columns and movable table

5 Classification and status

International classification (ICS): 25.040.20

Chinese Standard Classification (CCS): J 53

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

How to Download JB/T 15206.1-2025

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 15206.1-2025

$545.00