Valid

JB/T 15198-2025Gantry-type NC die sinking electro-discharge machines with movable crossbeam - Technical specification (English PDF)

动梁式龙门数控电火花成形机床 技术规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 15198-2025 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

Industry · Recommended

Issue date

December 17, 2025

Implementation date

July 1, 2026

Scope

JB/T 15198-2025 is the English-translated version of 动梁式龙门数控电火花成形机床 技术规范.

JB/T 15198-2025 is the Chinese standard "Gantry-type NC die sinking electro-discharge machines with movable crossbeam - Technical specification". This standard specifies the composition, environmental requirements, safety protection requirements, and technical requirements for moving-beam gantry CNC EDM forming machine tools.

It describes the corresponding testing methods and specifies inspection rules, marking, packaging, transportation, and storage. This standard applies to the manufacture of gantry-type EDM forming machine tools with a fixed worktable and a moving beam.

It was issued by Ministry of Industry and Information Technology. Issued on 2025-12-17, in force from 2026-07-01.

Found what you need?

Document preview — JB/T 15198-2025

National Standard of the People's Republic of China

ICS
25.080.99
Classification
J59

Issued by: Ministry of Industry and Information Technology

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Machine composition and environmental requirements
  • 4.1 Machine composition
  • 4.2 Environmental requirements
  • 4.2.1 Working environment
  • 4.2.2 Storage environment
  • 5 Safety protection requirements
  • 5.1 General requirements
  • 5.2 Machine operational safety protection requirements
  • 6 Technical requirements
  • 6.1 General requirements
  • 6.2 Machining and assembly of components
  • 6.2.1 General requirements
  • 6.2.2 Important basic structural components
  • 6.3 Appearance
  • 6.4 Mechanical motion systems
  • 6.5 Power supply and control systems
  • 6.6 Working fluid system
  • 6.7 Working fluid tank door hydraulic system
  • 6.8 Machine working accuracy
  • 6.9 Load operation test
  • 7 Test methods
  • 7.1 Test conditions
  • 7.2 Machining and assembly of components
  • 7.3 Appearance
  • 7.4 Mechanical motion systems
  • 7.5 Power supply and control systems
  • 7.6 Working fluid system
  • 7.7 Working fluid tank door hydraulic system
  • 7.8 Machine working accuracy
  • 7.9 Load operation test
  • 8 Inspection rules
  • 8.1 General
  • 8.2 Inspection principles
  • 8.3 Inspection items
  • 8.4 Conformity judgment
  • 9 Marking, packaging, transportation and storage
  • 9.1 Marking
  • 9.2 Packaging
  • 9.3 Transportation
  • 9.4 Storage

1 Foreword

JB/T 15198-2025 was issued by Ministry of Industry and Information Technology on 17 December 2025 and has been in force since 1 July 2026.

This is a draft translation for reference among interesting stakeholders. The finalized translation (passing through draft translation, self-check, revision and verification) will be delivered upon being ordered.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This document specifies the composition and environmental requirements, safety protection requirements and technical requirements for moving-beam gantry CNC electrical-discharge forming machines, describes the corresponding test methods, and specifies the inspection rules, marking, packaging, transportation and storage. This document is applicable to the manufacture of gantry-type electrical-discharge forming machines with a fixed worktable and moving beam.

JB/T 15198-2025 falls under ICS 25.080.99, in the field of manufacturing engineering.

This catalogue holds 1,459 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 About this standard

Sector: Mechanical & Machinery Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 15 pages (approximate)

4 Related standards

Standards on related subjects:

JB/T 12396-2015 — Proportional valve solenoids

JB/T 8490-2008 — Floor-type boring machines and floor-type milling and boring machines - Technical requirements

GB 20775-2006 — Fused Deposition Modeling machines - Technical requirements for safeguarding

JB/T 15541-2026 — Laser drilling machines - Technical specifications

JB/T 10143-2025 — Automatic fire extinguishers for electro-discharge machines - Technical specification

JB/T 10082-2025 — Reciprocating traveling type wire electro-discharge machines - Technical specifications

5 Classification and status

International classification (ICS): 25.080.99

Chinese Standard Classification (CCS): J 59

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

How to Download JB/T 15198-2025

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 15198-2025

$315.00