Valid

JB/T 15183.2-2025CNC gear hobbing edge-milling machines - Part 2: Specification (English PDF)

数控滚铣铣棱机 第2部分:技术规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 15183.2-2025 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

Industry · Recommended

Issue date

December 17, 2025

Implementation date

July 1, 2026

Scope

JB/T 15183.2-2025 is the English-translated version of 数控滚铣铣棱机 第2部分:技术规范.

JB/T 15183.2-2025 is the Chinese standard "CNC gear hobbing edge-milling machines - Part 2: Specification". This standard specifies the general requirements, accessories, tools, safety and hygiene, machining, and assembly requirements for CNC hobbing and milling machines.

It describes the corresponding test methods and specifies the requirements for inspection items, packaging, and accompanying technical documents. This standard applies to the manufacture of CNC hobbing and milling machines with a maximum workpiece diameter up to 320 mm.

It was issued by Ministry of Industry and Information Technology. Issued on 2025-12-17, in force from 2026-07-01.

Found what you need?

Document preview — JB/T 15183.2-2025

National Standard of the People's Republic of China

ICS
25.040.20
Classification
J56

Issued by: Ministry of Industry and Information Technology

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Electroplated Inner Cutting Disc
  • 3.2 Electroplated Needle File
  • 3.3 Electroplated Grinding Head
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Performance
  • 4.3 Safety and protection
  • 4.4 Castings, forgings and weldments
  • 4.5 Machining
  • 4.6 No-load operation requirements
  • 4.7 Load operation requirements
  • 4.8 Motion accuracy
  • 5 Test methods
  • 5.1 Appearance
  • 5.2 Protection requirements
  • 5.3 Machining and assembly quality of components
  • 5.4 Appearance quality
  • 5.5 Installation requirements for fire extinguishers
  • 5.6 Functional test requirements
  • 5.7 Anti-interference capability and functional stability test requirements
  • 5.8 Mass per unit area
  • 5.9 Tensile breaking force
  • 6 Inspection rules
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 6.3 Joint surfaces
  • 6.4 Numerical control system
  • 6.5 Working fluid system
  • 6.6 Lubrication system
  • 6.7 Machine running test
  • 6.8 Accuracy inspection
  • 6.9 Others
  • 7 Marking, packaging, transportation and storage
  • 7.2 Machining and assembly of components
  • 7.9 Load operation test
  • 8.1 General
  • 8.2 Inspection principles
  • 8.3 Inspection items
  • 8.4 Conformity judgment
  • 8.5 Storage
  • 9.1 Marking
  • 9.2 Packaging
  • 9.3 Transportation

1 Foreword

JB/T 15183.2-2025 was issued by Ministry of Industry and Information Technology on 17 December 2025 and has been in force since 1 July 2026.

It is one of 2 parts of the JB/T 15183 series.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard specifies the general requirements, accessories, tools, safety and hygiene, machining, and assembly requirements for CNC hobbing and milling machines. It describes the corresponding test methods and specifies the requirements for inspection items, packaging, and accompanying technical documents. This standard applies to the manufacture of CNC hobbing and milling machines with a maximum workpiece diameter up to 320 mm.

JB/T 15183.2-2025 falls under ICS 25.040.20, in the field of manufacturing engineering.

This catalogue holds 1,459 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 About this standard

Sector: Mechanical & Machinery Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 15 pages (approximate)

4 Related standards

Other parts of this standard:

JB/T 15183.1-2025 — Part 1: Testing of the accuracy

Standards on related subjects:

GB/T 38193-2019 — Machine tools automatic production line for automobile gears

JB/T 12396-2015 — Proportional valve solenoids

JB/T 8490-2008 — Floor-type boring machines and floor-type milling and boring machines - Technical requirements

JB/T 15181.2-2025 — Numerical control gear skiving machines - Part 2: Specification

JB/T 15181.1-2025 — Numerical control gear skiving machines - Part 1: Testing of the accuracy

5 Classification and status

International classification (ICS): 25.040.20

Chinese Standard Classification (CCS): J 56

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

How to Download JB/T 15183.2-2025

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 15183.2-2025

$105.00