JB/T 14936-2025Low-voltage static switching device (English PDF)
低压静态切换装置
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 14936-2025 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
Industry · Recommended
Issue date
July 2, 2025
Implementation date
February 1, 2026
Scope
JB/T 14936-2025 is the English-translated version of 低压静态切换装置.
JB/T 14936-2025 is the Chinese standard "Low-voltage static switching device". This standard specifies the classification, designation, marking, and requirements for low-voltage static switching devices, describes the corresponding test methods, and specifies inspection rules, marking, packaging, transportation, and storage.
This document applies to the manufacture of low-voltage static switching devices for indoor use at AC 1000V and below (single-phase, two-phase, and three-phase).
The manufacture of low-voltage static switching devices for outdoor use should refer to this standard. It was issued by Ministry of Industry and Information Technology. Issued on 2025-07-02, in force from 2026-02-01.
Found what you need?
Document preview — JB/T 14936-2025
National Standard of the People's Republic of China
- ICS
- 29.200
- Classification
- K85
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 14936-2025 was issued by Ministry of Industry and Information Technology on 2 July 2025 and has been in force since 1 February 2026.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the classification, designation, marking, and requirements for low-voltage static switching devices, describes the corresponding test methods, and specifies inspection rules, marking, packaging, transportation, and storage. This document applies to the manufacture of low-voltage static switching devices for indoor use at AC 1000V and below (single-phase, two-phase, and three-phase). The manufacture of low-voltage static switching devices for outdoor use should refer to this standard.
JB/T 14936-2025 falls under ICS 29.200, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 About this standard
Sector: Mechanical & Machinery Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
JB/T 11140-2011 — General requirements for lithium iron phosphate battery modules
JB/T 11141-2011 — General requirements for lithium-ion battery module cases
GB 7260.1-2008 — [GB/T 7260.1-2008] Uninterruptible power systems (UPS) -- Part 1-1: General and safety requirements for UPS used in operator access areas
JB/T 14051-2025 — Modularized DC Uninterruptable Power Supply System
JB/T 14050-2025 — Modularized AC Uninterruptable Power Supply System
JB/T 14405-2023 — Flywheel energy storage device for green data center
5 Classification and status
International classification (ICS): 29.200
Chinese Standard Classification (CCS): K 85
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download JB/T 14936-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 14936-2025
$315.00