JB/T 14449-2024Welding process qualification for lifting machinery (English PDF)
起重机械焊接工艺评定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 14449-2024 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
Industry · Recommended
Issue date
March 29, 2024
Implementation date
October 1, 2024
Scope
JB/T 14449-2024 is the English-translated version of 起重机械焊接工艺评定.
JB/T 14449-2024 is the Chinese standard "Welding process qualification for lifting machinery".
This standard specifies the terms and definitions of welding process assessment in the manufacture of steel structures for lifting machinery, and specifies the general requirements, welding process assessment elements and rules, weld detection and joint performance test, and requirements for exemption from welding process assessment.
This standard applies to the assessment activities of welding processes using arc welding, submerged arc welding, gas shielded arc welding, gas tungsten shielded arc welding and gas-electric vertical welding for steel structures with a steel thickness of 3mm or more in the load-bearing structural parts of lifting machinery.
It was issued by Ministry of Industry and Information Technology. Issued on 2024-03-29, in force from 2024-10-01.
Found what you need?
Document preview — JB/T 14449-2024
National Standard of the People's Republic of China
- ICS
- 53.020.20
- Classification
- J80
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Classifications and Groups
- 4.1 Types
- 5 Technical requirements
- 7 Test Methods
- 8 Inspection Rules
- 9 Marking, Packaging, Transportation and Storage
1 Foreword
JB/T 14449-2024 was issued by Ministry of Industry and Information Technology on 29 March 2024 and has been in force since 1 October 2024.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the terms and definitions of welding process assessment in the manufacture of steel structures for lifting machinery, and specifies the general requirements, welding process assessment elements and rules, weld detection and joint performance test, and requirements for exemption from welding process assessment. This standard applies to the assessment activities of welding processes using arc welding, submerged arc welding, gas shielded arc welding, gas tungsten shielded arc welding and gas-electric vertical welding for steel structures with a steel thickness of 3mm or more in the load-bearing structural parts of lifting machinery.
JB/T 14449-2024 falls under ICS 53.020.20, in the field of materials handling equipment.
This catalogue holds 232 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 About this standard
Sector: Mechanical & Machinery Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
GB/T 12602-2020 — Safety devices against over1oading for lifting appliances
JB/T 11963-2014 — Air Hoists
GB/T 10051.2-2010 — Lifting hooks -- Part 2: Technical conditions for forged hooks
JB/T 15401-2026 — Technical specification for intelligentization of ship-to-shore gantry crane
JB/T 13031-2026 — Safety requirement for builders hoists - Traction drive builders hoists installed in wells
JB/T 10603-2026 — Electro-hydraulic thrusters
5 Classification and status
International classification (ICS): 53.020.20
Chinese Standard Classification (CCS): J 80
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download JB/T 14449-2024
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 14449-2024
$830.00