Valid

JB/T 13603-2018Titanium and titanium alloy valves - Technical requirements (English PDF)

钛及钛合金阀门 技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 13603-2018 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 21, 2018

Implementation date

October 1, 2019

Scope

JB/T 13603-2018 is the English-translated version of 钛及钛合金阀门 技术条件.

JB/T 13603-2018 sets out the technical conditions for titanium and titanium alloy valves. It covers the technical requirements, the materials, the test methods, the inspection rules, and the marking, packaging, storage and transport.

The standard applies to titanium and titanium alloy gate valves, globe valves, check valves, ball valves, butterfly valves, plunger valves and plug valves in nominal pressures PN10 to PN160 and nominal sizes DN8 to DN800, for media between -29 °C and 300 °C; titanium valves of other types may be dealt with by reference to it. Issued on 21 December 2018, it has applied since 1 October 2019.

Found what you need?

Document preview — JB/T 13603-2018

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 13603-2018 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 21 December 2018 and has been in force since 1 October 2019.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

JB/T 13603-2018 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

4 Related standards

Standards on related subjects:

GB/T 13927-2022 — Industrial valves - Pressure testing

GB/T 13932-2016 — Cast iron swing check valves

JB/T 106-2004 — Valves - Marking and painting

JB/T 13599-2018 — Gas liquid drain valves

JB/T 13598-2018 — Gas-over-oil valve actuators - Technical requirements

JB/T 13597-2018 — Electric valve actuators for low temperature environments - Technical requirements

5 Classification and status

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download JB/T 13603-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 13603-2018

$150.00