JB/T 13591.1-2019Symmetrical double-column horizontal machining centres - Part 1: Testing of the accuracy (English PDF)
双柱对称卧式加工中心 第1部分:精度检验
This is a limited preview
Buy now to download the full PDF (32 pages)
Need quotation for your management?
Get a formal quotation for JB/T 13591.1-2019 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 2, 2019
Implementation date
January 1, 2020
Scope
JB/T 13591.1-2019 is the English-translated version of 双柱对称卧式加工中心 第1部分:精度检验.
JB/T 13591.1-2019 is the Chinese machinery industry standard covering symmetrical double-column horizontal machining centres, Part 1: Testing of the accuracy. It was issued on 2 May 2019 and has been in force since 1 January 2020, as a first edition.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2019 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 13591.1-2019
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 13591.1-2019 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 2 May 2019.
It is one of 3 parts of the JB/T 13591 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 13591.1-2019 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 32 pages
4 Related standards
Other parts of this standard:
JB/T 13591.2-2019 — Part 2: Technical requirements
JB/T 13591.2-2020 — Double-column Symmetrical Horizontal Machining Center - Part 2: Technical Conditions
Other editions:
JB/T 13591.1-2020 (later edition)
Standards on related subjects:
JB/T 12396-2015 — Proportional valve solenoids
JB/T 8490-2008 — Floor-type boring machines and floor-type milling and boring machines - Technical requirements
JB/T 6105-2007 — Hydraulic power units for NC machine tools - Technical requirements
5 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 32 pages — is available in the English PDF.
Similar standards
How to Download JB/T 13591.1-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 13591.2-2020 — Double-column Symmetrical Horizontal Machining Center - Part 2: Technical Conditions
JB/T 13591.2-2019 — Symmetrical double-column horizontal machining centres - Part 2: Technical requirements
JB/T 13591.1-2020 — Double-column Symmetrical Horizontal Machining Center - Part 1: Accuracy Inspection
JB/T 13591.1-2019
$485.00