JB/T 13330-2017Inspection methods for single-tube internal chip removal (BTA) deep hole drills (English PDF)
单管内排屑深孔钻检测方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 13330-2017 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
November 7, 2017
Implementation date
April 1, 2018
Scope
JB/T 13330-2017 is the English-translated version of 单管内排屑深孔钻检测方法.
JB/T 13330-2017 is the recommended Chinese machinery industry standard that sets the inspection methods for single-tube internal chip removal deep hole drills, the tools generally known as BTA drills.
What it fixes is how the checks are carried out: the examination of the drill's appearance and the measurement of its surface roughness, its diameter and the other dimensions related to them.
It quotes JB/T 10231.1-2015. The standard carries the Chinese classification J41 and the international classification 25.100.30, and it was issued by the Ministry of Industry and Information Technology.
Found what you need?
Document preview — JB/T 13330-2017
National Standard of the People's Republic of China
- ICS
- 25.100.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Electroplated Inner Cutting Disc
- 3.2 Electroplated Needle File
- 3.3 Electroplated Grinding Head
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Performance
- 4.3 Safety and protection
- 4.4 Castings, forgings and weldments
- 4.5 Machining
- 4.6 No-load operation requirements
- 4.7 Load operation requirements
- 4.8 Motion accuracy
- 5 Test methods
- 5.1 Appearance
- 5.2 Protection requirements
- 5.3 Machining and assembly quality of components
- 5.4 Appearance quality
- 5.5 Installation requirements for fire extinguishers
- 5.6 Functional test requirements
- 5.7 Anti-interference capability and functional stability test requirements
- 5.8 Mass per unit area
- 5.9 Tensile breaking force
- 6 Inspection rules
- 6.1 Factory inspection
- 6.2 Type inspection
- 6.3 Joint surfaces
- 6.4 Numerical control system
- 6.5 Working fluid system
- 6.6 Lubrication system
- 6.7 Machine running test
- 6.8 Accuracy inspection
- 6.9 Others
- 7 Marking, packaging, transportation and storage
- 7.2 Machining and assembly of components
- 7.9 Load operation test
- 8.1 General
- 8.2 Inspection principles
- 8.3 Inspection items
- 8.4 Conformity judgment
- 8.5 Storage
- 9.1 Marking
- 9.2 Packaging
- 9.3 Transportation
1 Foreword
JB/T 13330-2017 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 7 November 2017 and has been in force since 1 April 2018.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended Chinese machinery industry standard that sets the inspection methods for single-tube internal chip removal deep hole drills, the tools generally known as BTA drills. What it fixes is how the checks are carried out: the examination of the drill's appearance and the measurement of its surface roughness, its diameter and the other dimensions related to them. It quotes JB/T 10231.1-2015. The standard carries the Chinese classification J41 and the international classification 25.100.30, and
JB/T 13330-2017 falls under ICS 25.100.30, in the field of manufacturing engineering.
This catalogue holds 1,459 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
JB/T 10231.1-2015 — Tool inspection methods. Part 1: Generality
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 972-2008 — Thread rolling flat dies
GB/T 5104-2008 — The basic types and dimensions of hobs for involute splines
GB/T 5105-2004 — The basic types and dimensions of hobs for 45 Degree pressure angle involute splines
JB/T 13332-2017 — Carbide band saw blades for metal cutting - Technical requirements
JB/T 13331-2017 — Milling cutter arbors for turbine blade machining - Technical requirements
JB/T 13329-2017 — Superhard end mills with exchangeable heads
6 Classification and status
International classification (ICS): 25.100.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download JB/T 13330-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10231.1-2015 — Tool inspection methods. Part 1: Generality
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
Secure payment via Stripe
Payments accepted
JB/T 13330-2017
$115.00