JB/T 13301-2017Specification for permanent magnet eddy current motor speed governors (English PDF)
永磁涡流电机调速器技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 13301-2017 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
November 7, 2017
Implementation date
April 1, 2018
Scope
JB/T 13301-2017 is the English-translated version of 永磁涡流电机调速器技术条件.
Permanent magnet eddy current motor speed governors are the subject of JB/T 13301-2017, a recommended Chinese machinery industry standard. The document gives the types of these governors together with their basic parameters and dimensions, and states the technical requirements they have to meet.
It then lays down the inspection methods and rules, and finishes with the marking, the packaging and the warranty requirements. It quotes GB/T 4942.1-2006 and GB/T 9239.1-2006.
Its classification codes are K22 and ICS 29.160.30, and it was issued by the Ministry of Industry and Information Technology.
Found what you need?
Document preview — JB/T 13301-2017
National Standard of the People's Republic of China
- ICS
- 29.160.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 13301-2017 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 7 November 2017 and has been in force since 1 April 2018.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
Permanent magnet eddy current motor speed governors are the subject of JB/T 13301-2017, a recommended Chinese machinery industry standard. The document gives the types of these governors together with their basic parameters and dimensions, and states the technical requirements they have to meet. It then lays down the inspection methods and rules, and finishes with the marking, the packaging and the warranty requirements. It quotes GB/T 4942.1-2006 and GB/T 9239.1-2006. Its classification codes are K22 and ICS 29.160.30, and
JB/T 13301-2017 falls under ICS 29.160.30, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 4942.1-2006 — Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
GB/T 9239.1-2006 — Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 13957-2022 — Technical requirements for the fundamental series of three-phase large asynchronous motor
GB/T 22670-2018 — Test procedures for converter-fed three phase cage induction motors
JB/T 1012-2017 — Specification for YY series capacitor-run induction motors
JB/T 13300-2017 — Specification for permanent magnet eddy current motor couplings
JB/T 13299-2017 — Specification for YE4 series (IP55) three-phase induction motors (frame size 80 to 450)
JB/T 13298-2017 — Specification for YE3 series (IP23) three-phase induction motors (frame size 160 to 355)
6 Classification and status
International classification (ICS): 29.160.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download JB/T 13301-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 4942.1-2006 — Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
GB/T 9239.1-2006 — Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
Secure payment via Stripe
Payments accepted
JB/T 13301-2017
$205.00