Valid

JB/T 13242-2017Corrosion-resistant heat-traced composite sampling tubes (English PDF)

耐腐伴热采样复合管

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 13242-2017 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 12, 2017

Implementation date

January 1, 2018

Scope

JB/T 13242-2017 is the English-translated version of 耐腐伴热采样复合管.

JB/T 13242-2017 is the Chinese machinery industry standard for anti-corrosion electrically heat traced sampling tube bundles.

It specifies the terms and definitions, the basic structure, the classification and model designation, the requirements, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage of these corrosion-resistant heat traced composite sampling tubes.

The standard is applicable to power supply systems whose single-phase rated voltage does not exceed 250 V and whose other rated voltages do not exceed 480 V. It was issued on 12 April 2017 by the Ministry of Industry and Information Technology and took effect on 1 January 2018.

Found what you need?

Document preview — JB/T 13242-2017

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 13242-2017 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 12 April 2017.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

JB/T 13242-2017 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

4 Related standards

Standards on related subjects:

GB/T 38220-2019 — Technical requirements of assessment for high efficiency water pollutants control equipment—Rotary aerator

GB/T 35579-2017 — General specifications of gasoline vapor recovery unit

JB/T 8532-2008 — Pulse jet bag filters

JB/T 11391-2025 — Installation technical requirements and acceptance specifications for filter bags for bag filters

JB/T 13244-2017 — Integrated circulating semi-dry flue gas desulfurization and denitrification units

JB/T 13243-2017 — Wet electrostatic precipitators - Spraying devices

5 Classification and status

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download JB/T 13242-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 13242-2017

$365.00