Valid

JB/T 13075-2017EtherMAC system structure and communication specification for electrical equipment and systems of industrial machines (English PDF)

工业机械电气设备及系统用的EtherMAC系统结构与通讯规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (32 pages)

Need quotation for your management?

Get a formal quotation for JB/T 13075-2017 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

January 9, 2017

Implementation date

July 1, 2017

Scope

JB/T 13075-2017 is the English-translated version of 工业机械电气设备及系统用的EtherMAC系统结构与通讯规范.

JB/T 13075-2017 is the Chinese machinery industry standard covering the EtherMAC system structure and communication for industrial machinery electrical equipment and systems.

It specifies the architecture of the EtherMAC real-time Ethernet bus, meaning Ethernet for Manufacture Automation Control, together with its basic data transmission mode.

The standard establishes the general principle for the data communication transmission of motion control systems and sets out the communication protocol specification for the 100 MB network used in the field of industrial automation, including the EtherMAC bus for motion control.

It carries the Chinese classification J50 and was issued on 9 January 2017 by the Ministry of Industry and Information Technology, taking effect on 1 July 2017.

Found what you need?

Document preview — JB/T 13075-2017

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 13075-2017 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 9 January 2017 and has been in force since 1 July 2017.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 32 pages in English translation.

2 Scope Preview

JB/T 13075-2017 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 32 pages

4 Related standards

Standards on related subjects:

GB/T 9061-2025 — Metal-cutting machine tools - General specifications

GB 15760-2025 — Metal cutting machines - General specifications for safeguarding

GB/T 17421.2-2023 — Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes

JB/T 13070.3-2017 — Electrical equipment and system of NC machine tools - Performance test specification of AC drive unit - Part 3: Mechanical resonance automatic suppression

JB/T 13070.2-2017 — Electrical equipment and systems of NC machine tools - Performance test specification for AC drive units - Part 2: Parameter self-tuning

JB/T 13070.1-2017 — Electrical equipment and systems of NC machine tools - Performance test specification for AC drive units - Part 1: General

5 Classification and status

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 32 pages — is available in the English PDF.

Similar standards

How to Download JB/T 13075-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
32 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 13075-2017

$480.00